Hamamatsu
Contents
Vidicon
Heads:
Model | Connector | For | Tube | Resolution | Yoke | Notes |
---|---|---|---|---|---|---|
C2400-03 | IR
800-2100 nm |
720 x 576 | Lens: Xenoplan 1,4/23 mm | |||
C2741-03 | IR
400 to 1800 nm 400 to 2200 nm |
N2606
N2606-06 1" |
600 horizontal
CCIR: 625x509 |
Datasheet
| ||
C2741-03B | 1800 nm | N2606-02 | 22/01/2008
£8,340 Package includes Camera Head, Controller Unit, Camera Cable & BNC to BNC Cable
PC2Vision Frame Grabber Card & Cable Set Wasabi for Video Acquisition & Analysis Software | |||
C5840-10: EIA
C5840-11: CCIR |
IR
400 to 1650 nm |
2/3"? | Datasheet
Datasheet has graph comparing to C2741-03. TLDR: this is much less sensitive |
C790 X-Ray camera
moved from https://nucwiki.org/wiki/index.php/Hamamatsu_C790
mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit
Some relationship to Softex. Maybe they are used in Softex machines?
All wires on connector are used (at least on camera side).
Japan imports DDK JMSP2528 connector 025-028 silver-plated 28 core aviation plug 4 thick needle 24 thin needle
"Hamamatsu Softex X-Ray TV Camera controller C3205": seems to use the same connector
"Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible
Head: MODEL C790, TYPE 10, SER.NO 88054284
Controller: MODEL C790, TYPE 10, SER.NO 88074380
Camera
Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked
YOKE ASSEMBLY XVC-492E HC-01 CHUOMUSEN CO., LTD. MADE IN JAPAN 378024
Boards:
- OXVPOI-2 PRE AMP
- OXPPOI-2 HV-POWER
- OXVPO2-2 DEF FOCUS
Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.
CCD
C2741-63 camera controller
- 12PinCCD camera connector
- RS-232C
- 12PIN cable 5 m A3194-01
C6086 Series X-Ray CCD Camera
- 25 μm (C6086-03, 04)
- 30 μm (C6086-53, 54)
- 43 μm (C6086-13, 14)
- 62 μm (C6086-23, 24)
- Effective X-ray tube voltage range
- 10 to 100 kVp