Molectron
Information on Molectron / coherent laser power meters. Ultimately for the ezlaze project. I'm mostly interested in pyroelectric heads for pulsed power.
Contents
Ecosystem
Ecosystems:
- J25 smart
- DB25
- LM smart
- DB25
Warning: J25 and LM are not compatible. There was a conversion box you could buy at one point though, so it might just be different EPROM format
J25
LM
3Sigma
JD1000
Power supply: CS-1203000 (12V @ 3A, center positive)
McMaster
J25LP sensor
Came with JD1000. BNC output but no 25 pin adapter
Back:
MODEL NO: J25LP SERIAL NO: 238 RESPONSITIVITY 5.10 VOLT/JOULE 337.1 nm
3Sigma (eBay) sensor
3Sigma output:
Probe Resp: 2.570E-1 A/W @ 514 nm Probe Cal Date Sep 10 2003 Wavelenth Corr 1064 nm / On Attenuation Corr: 1.00E0 / Off Area Corr 1.0000 sq cm / Off
DB25 label:
FIXME
Sensor label:
FIXME
J-25MB-HE sensor
3Sigma output:
FIXME
Cable label:
COHERENT Item# 1110748 Model: J-25MB-HE Serial#: 0984E07R
Responsitivity 6.694e + 0 V/J Cal 1064 nm
LM-10
LM-10 HTD 250-10600nm 10mW-10w 500mJ/cm2 10ns @ 1064n Laser
Relatively cheap impulse buy to compare EEPROM formats
3Sigma (eBay) meter
Came with CW sensor
3Sigma (dumpster dive) meter
Came w/ sensor + BNC adapter
Screen is messed up
Came with Lemo cable. Doesn't fit trigger ports or anything I can tell
JD1000 meter
Capacitor exploded when plugged in (presumably due to age). Didn't work after, although some lights turned on. Scrapped