Difference between revisions of "Molectron"

From Microwiki
Jump to: navigation, search
Line 2: Line 2:
  
 
=Ecosystem=
 
=Ecosystem=
 +
{| class="wikitable"
 +
|+Summary
 +
!Family
 +
!Connector
 +
!Sensor
 +
!Meter
 +
!Memory
 +
!
 +
|-
 +
|JSA
 +
|DB25
 +
|J8
 +
J25
 +
 +
J50
 +
 +
OP-2
 +
 +
S10
 +
|3sigma
 +
FieldMax-TOP
 +
 +
FieldMax-TO
 +
 +
FieldMate
 +
|25LC320
 +
(SPI)
 +
|
 +
|-
 +
|LM
 +
|DB25
 +
|LM-2
 +
LM-10
 +
 +
LM-30
 +
 +
LM-45
 +
 +
LM-100
 +
|
 +
|24C04
 +
(I2C)
 +
|
 +
|-
 +
|PM
 +
|DB25
 +
|PM10
 +
PM150
 +
|PM5200
 +
|93C46N
 +
(SPI)
 +
|Power Max (PM)
 +
Even if it was electrically compatible w/ JSA EEPROM format is completely different
 +
|}
  
  
Line 9: Line 63:
 
**Interface: DB25
 
**Interface: DB25
 
**Also known as JSA?
 
**Also known as JSA?
−
**3sigma, FieldMax-TOP, FieldMax-TO, FieldMate.s
+
**3sigma, FieldMax-TOP, FieldMax-TO, FieldMate
 
**Intended to be used with J25, J50 power probes
 
**Intended to be used with J25, J50 power probes
 
**I also have an S10 energy probe, seems to be compatible
 
**I also have an S10 energy probe, seems to be compatible
Line 460: Line 514:
 
Capacitor exploded when plugged in (presumably due to age). Didn't work after, although some lights turned on. Scrapped
 
Capacitor exploded when plugged in (presumably due to age). Didn't work after, although some lights turned on. Scrapped
  
−
== Newport 835 ==
+
==Newport 835==
 
Newport project: http://hololaser.kwaoo.me/electronics/Newport835.html
 
Newport project: http://hololaser.kwaoo.me/electronics/Newport835.html
  
 
I just happen to also have a few Newport 835s. Unfortunately my inventory is:
 
I just happen to also have a few Newport 835s. Unfortunately my inventory is:
  
−
* Newport 835, S/N 1477: calibrated for 818-SL, S/N 3190
+
*Newport 835, S/N 1477: calibrated for 818-SL, S/N 3190
−
* Newport 835, S/N 1502: calibrated for 818-SL, S/N 3165
+
*Newport 835, S/N 1502: calibrated for 818-SL, S/N 3165
−
* Newport 818-SL, S/N 3191
+
*Newport 818-SL, S/N 3191
  
 
...which is close but doesn't entirely match. Dumped the EPROM / calibration data though in case I want to play with it in the future
 
...which is close but doesn't entirely match. Dumped the EPROM / calibration data though in case I want to play with it in the future
  
−
== Liconix 45PM ==
+
==Liconix 45PM==
 
My oldest laser power meter. Meter + head both have S/N 9110014.
 
My oldest laser power meter. Meter + head both have S/N 9110014.
  

Revision as of 09:01, 1 November 2021

Information on Molectron / coherent laser power meters. Ultimately for the ezlaze project. I'm mostly interested in pyroelectric heads for pulsed power.

Ecosystem

Summary
Family Connector Sensor Meter Memory
JSA DB25 J8

J25

J50

OP-2

S10

3sigma

FieldMax-TOP

FieldMax-TO

FieldMate

25LC320

(SPI)

LM DB25 LM-2

LM-10

LM-30

LM-45

LM-100

24C04

(I2C)

PM DB25 PM10

PM150

PM5200 93C46N

(SPI)

Power Max (PM)

Even if it was electrically compatible w/ JSA EEPROM format is completely different


Ecosystems:

  • J DB-25 smart probes
    • Interface: DB25
    • Also known as JSA?
    • 3sigma, FieldMax-TOP, FieldMax-TO, FieldMate
    • Intended to be used with J25, J50 power probes
    • I also have an S10 energy probe, seems to be compatible
  • LM DB-25 smart probes
    • Interface: DB25
    • Intended to be used with LM probes

Warning: J25 and LM are not compatible.

Other DB25 probes (none are known to be compatible):

  • Ophir
  • Laserpoint
  • Gentec
  • Newport

List of Molectron related power meters:

  • 3sigma
  • 4omega
  • FieldMate
  • FieldMax-TO
  • FieldMax-TOP
  • Fieldmaster

Lots of good info:

  • Energy Sensors Coherent J25.pdf
  • 2009_LMCCatalog86.pdf


There was a conversion box you could buy at one point though (thermal-smartsensor-adapter-data-sheet.pdf), so it might just be different EPROM format

  • JSA-BNC Adapter
  • 0012-2340: JSA-BNC Adapter for use with 3sigma, FieldMax-TOP, and FieldMax-P
  • 1056827: SmartSensor Adapter for use with 3sigma, FieldMax-TOP, FieldMax-TO,and FieldMate
  • Automatically configures itself to work with LM-model sensors


J25

TODO: figure out pinout, EEPROM format so I can recal and upgrade adapters

LM

3Sigma

File archive: 

3sigmaAppQuickRef.pdf
3sigmaLVDriverUG.pdf
3sigma_LV_Driver.zip
3sigma Users Manual.pdf
3sigmaWinApps.zip

Battery 

Ni-MH BATTERY
7.2V 3.8 A-h
MOLECTRON
P/N 0012-0100

JD1000

Power supply: CS-1203000 (12V @ 3A, center positive)

McMaster

J25LP-4 sensor

Came with 3 sigma in the trash

3Sigma output: 

Probe Resp: 1.827E+01 V/J @ 248 nm
Probe Cal Date Dec 8 2008

Head label: 

Responsivity
1.828e+1 V/J
Cal: 248 nm

COHERENT
Model: J25LP-4

COHERENT CALIBRATION TAG
DATE CALIB 12/08/08
TECH KH
NEXT DUE 12/08/09

Item #: 0010-8145
Serial #: 0437E03

Shell label: 

COHERENT
PROBE SERIAL NO. 0437E03


J25LP sensor

Came with JD1000. BNC output but no 25 pin adapter

Back: 

MODEL NO: J25LP
SERIAL NO: 238

RESPONSITIVITY
5.10 VOLT/JOULE
337.1 nm

S10 sensor

From 3Sigmal (eBay)


3Sigma output: 

Probe Resp: 2.570E-1 A/W @ 514 nm
Probe Cal Date Sep 10 2003

DB25 label: 

Molectron
MODEL NO.: S10
SERIAL NO. 0338H03

DB25 label: 

Molectron
SER NO 0338H03
CAL DATE 9/18/03
CAL DUE 9/18/04
TECH B DUNLAP
0011-6322
TRACETABLE TO NIST

Cable label: 0012-2530


25LC320

  • 32K SPI Bus Serial EEPROM
Pin Function Notes
1 Silkscreen: Th
2 Silkscreen: Py
3 Sensor + Silkscreen: SG
4 Silkscreen: S1


4, 6, 14,16 shorted

W3 to W4 jumper

5 EEPROM CSn Pullup resistor to VCC
6 4, 6, 14,16 shorted
7
8
9 Jumper N/C
10 Jumper 10-12 shorted
11 Jumper 10-12 shorted
12 Jumper 10-12 shorted
13 EEPROM VSS
14 4, 6, 14,16 shorted
15 Sensor -
16 4, 6, 14,16 shorted
17
18
19
20
21
22 EEPROM SCK
23 EEPROM SI
24 EEPROM SO
25 EEPROM VCC 2.5-5.5V
EEPROM wiring for read out
EEPROM pin Function DB25 pin Note
1 CSn 5
2 SO 24
3 WPn 25 VCC
4 VSS 13
5 SI 23
6 SCK 22
7 HOLDn 25 VCC
8 VCC 25

J-25MB-HE sensor

Cable label: 

COHERENT
Item# 1110748
Model: J-25MB-HE
Serial#: 0984E07R

Responsitivity
6.694e+0 V/J
Cal 1064 nm

LM-10

LM-10 HTD 250-10600nm 10mW-10w 500mJ/cm2 10ns @ 1064n Laser

Relatively cheap impulse buy to compare EEPROM formats

Significantly more complicated inside. Instead of being a simple BNC out there is a whole bundle of cases. Think this is "heated" version maybe though and there might be a dumber version


Atmel 24C04

  • 4KB I2C
  • PDIP8
  • I was going to make an adapter and figure out pinout, but I decided to just clip on instead
Pin Function Notes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25


3Sigma (eBay) meter

Came with CW sensor

3Sigma (dumpster dive) meter

Came w/ sensor + BNC adapter

Screen is messed up

Came with Lemo cable. Doesn't fit trigger ports or anything I can tell

JD1000 meter

Capacitor exploded when plugged in (presumably due to age). Didn't work after, although some lights turned on. Scrapped

Newport 835

Newport project: http://hololaser.kwaoo.me/electronics/Newport835.html

I just happen to also have a few Newport 835s. Unfortunately my inventory is:

  • Newport 835, S/N 1477: calibrated for 818-SL, S/N 3190
  • Newport 835, S/N 1502: calibrated for 818-SL, S/N 3165
  • Newport 818-SL, S/N 3191

...which is close but doesn't entirely match. Dumped the EPROM / calibration data though in case I want to play with it in the future

Liconix 45PM

My oldest laser power meter. Meter + head both have S/N 9110014.

Completely analog / calibrated via pots.

More info

Source code: https://github.com/JohnDMcMaster/molectron


Retrieved from "http://microwiki.org/wiki/index.php?title=Molectron&oldid=1212"