Hamamatsu

Vidicon

Heads:

Model	Connector	For	Tube	Resolution	Yoke	Notes
C2400-03		IR 800-2100 nm		720 x 576		Lens: Xenoplan 1,4/23 mm
C2741-03		IR 400 to 1800 nm 400 to 2200 nm	N2606 N2606-06 1"	600 horizontal EIA: 525x485 CCIR: 625x509		S/N: 46 dB p-p/rms
C2741-03B		1800 nm	N2606-02			22/01/2008 £8,340 Package includes Camera Head, Controller Unit, Camera Cable & BNC to BNC Cable Also: PC2Vision Frame Grabber Card & Cable Set Wasabi for Video Acquisition & Analysis Software

C790 X-Ray camera

moved from https://nucwiki.org/wiki/index.php/Hamamatsu_C790

mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit

Some relationship to Softex. Maybe they are used in Softex machines?

All wires on connector are used (at least on camera side).

Japan imports DDK JMSP2528 connector 025-028 silver-plated 28 core aviation plug 4 thick needle 24 thin needle

"Hamamatsu Softex X-Ray TV Camera controller C3205": seems to use the same connector

"Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible

Head: MODEL C790, TYPE 10, SER.NO 88054284

Controller: MODEL C790, TYPE 10, SER.NO 88074380

Camera

Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked

YOKE ASSEMBLY XVC-492E HC-01 CHUOMUSEN CO., LTD. MADE IN JAPAN 378024

Boards:

• OXVPOI-2 PRE AMP
• OXPPOI-2 HV-POWER
• OXVPO2-2 DEF FOCUS

Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.

CCD

C2741-63 camera controller

• 12PinCCD camera connector
• RS-232C
• 12PIN cable 5 m A3194-01
  

C6086 Series X-Ray CCD Camera

• 25 μm (C6086-03, 04)
• 30 μm (C6086-53, 54)
• 43 μm (C6086-13, 14)
• 62 μm (C6086-23, 24)
• Effective X-ray tube voltage range
• 10 to 100 kVp