Difference between revisions of "User:Mcmaster/Kms310rt"

From Microwiki
Jump to: navigation, search
(Created page with "Category:mcmaster This page describes the KMS310RT (infinity K2 IND) in detail. Effort was started in effort to better repair them The auto-focus and camera sync featur...")
 
m (Mcmaster moved page Kms310rt (Mcmaster) to User:Mcmaster/Kms310rt without leaving a redirect)
 
(One intermediate revision by the same user not shown)
Line 8: Line 8:
 
= Optical schematic =
 
= Optical schematic =
  
{{:mcmaster:tech_inst:kms310rt:k2_optic.png?600|}}
+
[[File:mcmaster_tech_inst_kms310rt_k2_optic.png|300 px]]
  
{{:mcmaster:tech_inst:kms310rt:bs_to_lamp_schem.jpg?400|}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_to_lamp_schem.jpg|300 px]]
  
{{:mcmaster:tech_inst:kms310rt:bs_area_schem.jpg?400|}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_area_schem.jpg|300 px]]
  
 
Above: note that BS1 assembly is not aligned.  Disk has been removed for clarity
 
Above: note that BS1 assembly is not aligned.  Disk has been removed for clarity
  
{{:mcmaster:tech_inst:kms310rt:objective_to_bs_schem.jpg?400|}}
+
[[File:mcmaster_tech_inst_kms310rt_objective_to_bs_schem.jpg|300 px]]
  
 
= Overview =
 
= Overview =
  
{{:mcmaster:tech_inst:kms310rt:overview.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_overview.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:overview_top.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_overview_top.jpg|300 px]]
  
  
 
= Aperture/filters =
 
= Aperture/filters =
  
{{:mcmaster:tech_inst:kms310rt:aperature_assy_0.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_0.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:aperature_assy_1.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_1.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:aperature_assy_2.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_2.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:aperature_assy_3.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_3.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:aperature_assy_4.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_4.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:aperature_assy_6.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_aperature_assy_6.jpg|300 px]]
  
{{:mcmaster:tech_inst:kms310rt:filter_assy.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_filter_assy.jpg|300 px]]
  
  
Line 42: Line 42:
 
Has an FPGA, presumably for auto-focus logic
 
Has an FPGA, presumably for auto-focus logic
  
{{:mcmaster:tech_inst:kms310rt:board_sticker.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_board_sticker.jpg|300 px]]
  
{{:mcmaster:tech_inst:kms310rt:board_no_sticker.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_board_no_sticker.jpg|300 px]]
  
 
Chips:
 
Chips:
Line 55: Line 55:
 
= Beam splitter area =
 
= Beam splitter area =
  
{{:mcmaster:tech_inst:kms310rt:bs_aperature.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_aperature.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_area.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_area.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_assy_front.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_assy_front.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_assy_out.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_assy_out.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_assy_side.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_assy_side.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_assy_top.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_assy_top.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_to_filter.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_to_filter.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:bs_to_lamp.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_bs_to_lamp.jpg|300 px]]
  
  
Line 70: Line 70:
 
Schematic: M3
 
Schematic: M3
  
{{:mcmaster:tech_inst:kms310rt:defect_area2.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_defect_area2.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:defect_area.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_defect_area.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:defect.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_defect.jpg|300 px]]
  
 
During removal additional damage was sustained/noticed.  Its possible the original white stuff (mostly?) comes off.  Regardless, this needs to be replaced
 
During removal additional damage was sustained/noticed.  Its possible the original white stuff (mostly?) comes off.  Regardless, this needs to be replaced
Line 80: Line 80:
 
Schematic: L2
 
Schematic: L2
  
{{:mcmaster:tech_inst:kms310rt:diffusor_btm.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_diffusor_btm.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:diffusor_top.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_diffusor_top.jpg|300 px]]
  
{{:mcmaster:tech_inst:kms310rt:diffusor_surface.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_diffusor_surface.jpg|300 px]]
  
 
Above: surface irregularities.  These show up on microscope images
 
Above: surface irregularities.  These show up on microscope images
Line 91: Line 91:
 
= Nipkow disk assembly =
 
= Nipkow disk assembly =
  
{{:mcmaster:tech_inst:kms310rt:disk1.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_disk1.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:disk2.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_disk2.jpg|300 px]]
{{:mcmaster:tech_inst:kms310rt:disk3.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_disk3.jpg|300 px]]
  
  
 
= Lamp =
 
= Lamp =
  
{{:mcmaster:tech_inst:kms310rt:lamp.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_lamp.jpg|300 px]]
  
  
 
= Observation tube =
 
= Observation tube =
  
{{:mcmaster:tech_inst:kms310rt:reflector_assy.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_reflector_assy.jpg|300 px]]
  
  
 
= Objective =
 
= Objective =
  
{{:mcmaster:tech_inst:kms310rt:objective_to_bs.jpg?300}}
+
[[File:mcmaster_tech_inst_kms310rt_objective_to_bs.jpg|300 px]]

Latest revision as of 02:05, 5 March 2019


This page describes the KMS310RT (infinity K2 IND) in detail. Effort was started in effort to better repair them

The auto-focus and camera sync features seem to add considerable complexity. I don't care about auto-focus and am unsure if I need the video sync feature (I should be able to deal with it through camera registers). Unfortunately, these add a considerable number of mirrors etc that need to be clean


Optical schematic

Mcmaster tech inst kms310rt k2 optic.png

Mcmaster tech inst kms310rt bs to lamp schem.jpg

Mcmaster tech inst kms310rt bs area schem.jpg

Above: note that BS1 assembly is not aligned. Disk has been removed for clarity

Mcmaster tech inst kms310rt objective to bs schem.jpg

Overview

Mcmaster tech inst kms310rt overview.jpg Mcmaster tech inst kms310rt overview top.jpg


Aperture/filters

Mcmaster tech inst kms310rt aperature assy 0.jpg Mcmaster tech inst kms310rt aperature assy 1.jpg Mcmaster tech inst kms310rt aperature assy 2.jpg Mcmaster tech inst kms310rt aperature assy 3.jpg Mcmaster tech inst kms310rt aperature assy 4.jpg Mcmaster tech inst kms310rt aperature assy 6.jpg

Mcmaster tech inst kms310rt filter assy.jpg



Main circuit board

Has an FPGA, presumably for auto-focus logic

Mcmaster tech inst kms310rt board sticker.jpg

Mcmaster tech inst kms310rt board no sticker.jpg

Chips:

  • 74HC14
  • MAXIM MAX681 5V to +/-10V converter
  • ALTERA EPM5128 FPGA
  • NAT SEMI LM1881 VIDEO SYNC SEPARATOR


Beam splitter area

Mcmaster tech inst kms310rt bs aperature.jpg Mcmaster tech inst kms310rt bs area.jpg Mcmaster tech inst kms310rt bs assy front.jpg Mcmaster tech inst kms310rt bs assy out.jpg Mcmaster tech inst kms310rt bs assy side.jpg Mcmaster tech inst kms310rt bs assy top.jpg Mcmaster tech inst kms310rt bs to filter.jpg Mcmaster tech inst kms310rt bs to lamp.jpg


Defective optic: mirror

Schematic: M3

Mcmaster tech inst kms310rt defect area2.jpg Mcmaster tech inst kms310rt defect area.jpg Mcmaster tech inst kms310rt defect.jpg

During removal additional damage was sustained/noticed. Its possible the original white stuff (mostly?) comes off. Regardless, this needs to be replaced

Defective optic: diffusor?

Schematic: L2

Mcmaster tech inst kms310rt diffusor btm.jpg Mcmaster tech inst kms310rt diffusor top.jpg

Mcmaster tech inst kms310rt diffusor surface.jpg

Above: surface irregularities. These show up on microscope images

I think this is supposed to be a diffuser to make lamp illumination more even. Unfortunately, the surface has warped leading to sharp irregularities in the final images

Nipkow disk assembly

Mcmaster tech inst kms310rt disk1.jpg Mcmaster tech inst kms310rt disk2.jpg Mcmaster tech inst kms310rt disk3.jpg


Lamp

Mcmaster tech inst kms310rt lamp.jpg


Observation tube

Mcmaster tech inst kms310rt reflector assy.jpg


Objective

Mcmaster tech inst kms310rt objective to bs.jpg