Small Microscope

From Microwiki
Revision as of 08:27, 11 March 2022 by Mcmaster (talk | contribs) (Optem)
Jump to: navigation, search
McMaster laser fault injection workstation showing microscope being used to focus and aim a laser

Originally created while researching basic microscopes for McMaster SCA/FI workstation. These need to see a rough idea of a die position, but not resolve individual transistors. Goals were:

  • Light enough to mount on 3018 Pro CNC Z axis
  • Compact => not get in the way of other tools such as laser
  • Relatively inexpensive (no more than $300?)

USB microscope

Dino-Lite

These are the most common professional option in this category. Common models appear to be the AM2111 (basic, ~$100) and AM3111 (more LEDs, variable brightness, $150). However they have relatively low resolution (0.3 MP)

AD-4013MT

AD-4013MT mcmaster.jpg


McMaster: ordered "Dino-Lite Premier2 1280x1024 USB Microscope AD-4013MT" for $300 on eBay. With a 1.3 MP camera I'm hoping this will produce a pretty decent image.

"The AD4013MT handheld digital microscope is a 1.3 MP camera with an aluminum alloy housing and interchangeable nozzle feature and a max resolution of 1280 x 1024. The MicroTouch feature on the handheld digital microscope gives users the option of taking a picture right from the scope itself. This model comes with both a standard open faced nozzle as well as a sealed transparent cap nozzle designed to protect the lens and built in LED lights from dust, debris and moisture common to certain work environments. The removable nozzle feature also provides the user the option of increasing working distance when using the digital microscope without any nozzle installed."

Jiusion-1000x

Jiusion-1000x.jpg

One of the least expensive microscopes on Amazon.

McMaster:

  • The first laser workstation used one of these
    • Usable for my application but just barely. Try to replace with something I enjoy using more
  • Knob changes both focus and zoom
  • Plastic cap can be removed
  • Needed more tension to keep balls stable
    • Locking nut was replaced with a 1/4-20 bolt after drilling through
  • USB combination cable is unreliable / bad contact sometimes
  • Ground off mounting stand and epoxied the remaining ball + shaft into a 3D printed adapter to allow mounting the microscope to t-slot

USB2-MICRO-250X

USB2-MICRO-250X.jpg

McMaster: fixed zoom which unfortunately wasn't enough for my application. Otherwise I liked the focus knob

Modular tube

These can be used to make custom microscope assemblies. Some of these support epi illumination as well as ring illumination.

Optem

Above: unit with epi illumination from inspection machine. Far left: 90 degree steering mirror. Middle knobs: zoom and focus. Side port: for epi illumination fiber. Far right: a "Mituotyo M Plan Apo 20x SL" objective was attached