Allied MultiPrep

From Microwiki
Revision as of 05:49, 24 February 2020 by Mcmaster (talk | contribs)
Jump to: navigation, search


Motor

Both motors (drive, osc) were identical

PITTMAN
GM8712-41
19.1 VDC
187:1 RATIO
MFG 05-29-98 S


Head connector

Head plug

  • 4x2 (8 pins)
  • 3 mm pitch
  • Head female, cable male
  • Maybe Minitek Pwr™ 3.0 Series
    • https://www.digikey.com/product-detail/en/amphenol-icc-fci/10132445-08LF/609-5283-ND/7590945
Mcmaster allied multiprep head 4x8 connector.jpg
Mcmaster allied multiprep head cable standard.jpg
Mcmaster allied multiprep machine new connector label.jpg
8 pin mini-amphenol t o 8 pin mini-DIN "standard connector" https://en.wikipedia.org/wiki/File:Pseudo_miniDIN-8b_Diagram.png
Mini-amphenol mini-DIN Signal Note
1 1
2 2
3 8
4 7
5 3
6 5
7 6
8 N/C
Mcmaster allied multiprep machine old connector label.jpg
5 pin mini-DIN to 8 pin mini-amphenol Same connector as S-video Needed for old machine https://en.wikipedia.org/wiki/Mini-DIN_connector#/media/File:Close-up_of_S-video_female_connector.jpg
Mini-amphenol mini-DIN Signal Note
1
2
3
4
5
6
7
8

Motor on mini-DIN

  • 1: drive motor +
  • 3: drive motor -
  • 7 V
8 pin CPC to 8 pin mini-amphenol Guessing this was a custom cable
Mini-amphenol cpc Signal Note
1 8
2 6
3 1
4 4
5 5
6 3
7 2
8 N/C