Difference between revisions of "Allied MultiPrep"

From Microwiki
Jump to: navigation, search
Line 11: Line 11:
 
  MFG 05-29-98 S
 
  MFG 05-29-98 S
  
 +
33 and 17 ohm. Is one of these damaged? Why are their resistances so different?
  
 +
Tried testing under load
 +
 +
* black goop
 +
** 12.19 V @ 1.266 A (current limited)
 +
** 8 ohm after
 +
* other
 +
** Initially drawing way less current than first
 +
*** 12.12 V @ 0.332 A (voltage limited)
 +
** then started smoking
 +
*** 11.68 V @ 1.248 A (current limited)
 +
** 6 ohm after
 +
 +
Aren't these rated 19.1 V? Am I misunderstanding?
 +
 +
 +
Try pinning out the spare bad head
 +
 +
* 1-5: 2.8 k
 +
* 2-6: 147 R
 +
* weird...
 +
 +
 +
what does the secondary machine test? (believe good)
 +
 +
* 1-5: 9.0 R
 +
* 2-6: 10.4 R
 +
 +
 +
What is max voltage allied puts out on motors?
 +
 +
<br />
 
==Head connector==
 
==Head connector==
  

Revision as of 06:26, 24 February 2020


Motor

Both motors (drive, osc) were identical

PITTMAN
GM8712-41
19.1 VDC
187:1 RATIO
MFG 05-29-98 S

33 and 17 ohm. Is one of these damaged? Why are their resistances so different?

Tried testing under load

  • black goop
    • 12.19 V @ 1.266 A (current limited)
    • 8 ohm after
  • other
    • Initially drawing way less current than first
      • 12.12 V @ 0.332 A (voltage limited)
    • then started smoking
      • 11.68 V @ 1.248 A (current limited)
    • 6 ohm after

Aren't these rated 19.1 V? Am I misunderstanding?


Try pinning out the spare bad head

  • 1-5: 2.8 k
  • 2-6: 147 R
  • weird...


what does the secondary machine test? (believe good)

  • 1-5: 9.0 R
  • 2-6: 10.4 R


What is max voltage allied puts out on motors?


Head connector

Head plug

  • 4x2 (8 pins)
  • 3 mm pitch
  • Head female, cable male
  • Maybe Minitek Pwr™ 3.0 Series
    • https://www.digikey.com/product-detail/en/amphenol-icc-fci/10132445-08LF/609-5283-ND/7590945
Mcmaster allied multiprep head 4x8 connector.jpg
Mcmaster allied multiprep head cable standard.jpg
Mcmaster allied multiprep machine new connector label.jpg
8 pin mini-amphenol t o 8 pin mini-DIN "standard connector" https://en.wikipedia.org/wiki/File:Pseudo_miniDIN-8b_Diagram.png
Mini-amphenol mini-DIN Signal Note
1 1
2 2
3 8
4 7
5 3
6 5
7 6
8 N/C
Mcmaster allied multiprep machine old connector label.jpg
5 pin mini-DIN to 8 pin mini-amphenol Same connector as S-video Needed for old machine https://en.wikipedia.org/wiki/Mini-DIN_connector#/media/File:Close-up_of_S-video_female_connector.jpg
Mini-amphenol mini-DIN Signal Note
1
2
3
4
5
6
7
8

Motor on mini-DIN

  • 1: drive motor +
  • 3: drive motor -
  • 7 V
8 pin CPC to 8 pin mini-amphenol Guessing this was a custom cable
Mini-amphenol cpc Signal Note
1 8
2 6
3 1
4 4
5 5
6 3
7 2
8 N/C