Difference between revisions of "Vacuum"

Latest revision as of 04:09, 21 August 2024

Rebuild videos / resources
Vendor	Model	Link(s)	Note
Agilent	V81M	Link
ALCATEL	ATP400C	Link
Edwards	EXT255	Aggressive repair of totaled pump
Edwards	nEXT240	Oil, bearing replacement
Edwards	nEXT730/930	Official bearing replacement
Pfeiffer	TPH2101	Big boi
Pfeiffer / Balzers	TPU050	Hall sensor replacement
Pfeiffer / Balzers		Misc short	See wiki page / mcmaster notes
Pfeiffer	TMU260	Cleaning
Leybold		Bearings
Leybold	MAG2000CT	Link
Leybold	Turbovac50	Link
Leybold	Turbovac150	Disassembly
Leybold	TMP151	Link
Leybold	T1600	Link
Varian	V200	Link
Misc		Pump balancing

Turbo pump oils:

Vendor	Model	Viscosity	Density	Vapor Pressure	Notes
Apiezon	AP303	29 mm²/s @ 40 °C	0.97 g/mL @ 20 °C	3.1E-7 Torr @ 80°C
braycote	815Z	148 mm²/s @ 38°C 45 mm²/s @ 100°C		4E-13 Torr @ 20C 2E-9 Torr @ 100C	DO NOT USE THIS. Only in here for reference McMaster: not a turbo oil so much as something I used in a pinch that I had laying around Viscosity is way too high "mixture of small PTFE particles and a perfluorinated polyether liquid"
Cambridge Mills	CMP500	8.7 mm2/s @ 130C	0.922 g/mL @ 22C	0.1 mm @ 130C	"Hydrocarbon Oil" A&J: "TL011 is discontinued and Pfeiffer does not offer a replacement for it. You could use CMP500, which is chemically identical." McMaster: purchased this for my Balzers pumps
Dymavac	500	8.7 mm²/s @ 54 ° C		1E-7 Torr @ 25°C
Leybold	HE500				LVO variant required? 98-198-052 98-198-053 98-198-030
Leybold	Leybonol LVO-250	13 mm²/s @ 40 °C 3.5 mm²/s @ 100 °C	925 kg/m3 @ 15C	"<0.5 Pa @ 20C"	Replaces HE500 Oil type: Synthetic oil (Ester oil with additives) "Bearing lubricant for turboradial blowers." TURBOSTREAM
Pfeiffer	TL 011	10.5 mm²/s @ 40 °C	0.947 kg/dm3 @ 20 °C	No data	TPU/TPH official oil

Notes:

McMaster sensor state 2024-07-17

Got burned by mismatched GP275 sensor to gauge
- I thought it was going to give an error like 40%, but its actually a zero point error => massive misreading / order of magnitudes
Inficon
- Found 3x BCG450 at flea market. 1 / 3 work
- Notes
MKS 901P might also go into ecosystem

GP275 controllers:

GP375
- Green display
- RS232 as DB9
- Circa 2009
275106, 275108
- Red display
- Cable seems to be uncommon
- Cable has AC + GP275 connection
Granville-Phillips 316 Vacuum Gauge Controller 316001
- IG controller
- Integrated power supply, controller
HP 59827A
- Rebranded GP
  - Somewhat similar to Granville-Phillips 316 Vacuum Gauge Controller 316001
- Half width IG controller (integrated PS / controller)
Granville Phillips 307001
- Full width IG controller (half PS, half controller)
- RS232 is optional card

Can get ones with integrated controllers. You can take the sensor out of them but it doesn't have the keying on the connector

Haven't played with DeviceNet, RS485, etc direct control on these

Interesting but tubes are relatively scarce on surplus market

Nice integrated display + sensor pluggable architecture

https://www.youtube.com/watch?v=hrZwKTwS9cs

HASTING INSTRUMENTS VACUUM GAUGE MODEL 760 110-220 VAC 760

TELEDYNE HASTINGS DUAL SENSOR VACUUM GAUGE MODEL HPM-2002-OBE

HVG-2020B

Teledyne Hastings HPM-2002 Digital Dual Vacuum Digital Gauge w/ RS232 Option

@@ Line 3: / Line 3: @@
 [https://www.youtube.com/watch?v=f1SErZyhMe4 3D animation]
+[https://www.youtube.com/watch?v=xIfOHrXyoJo 3D animation]
 {| class="wikitable"
@@ Line 143: / Line 145: @@
 |"Hydrocarbon Oil"
 A&J: "TL011 is discontinued and Pfeiffer does not offer a replacement for it. You could use CMP500, which is chemically identical."
+McMaster: [https://www.ajvs.com/cambridge-mills-cmp-500-turbo-pump-oil-41360 purchased this] for my Balzers pumps
 |-
 |Dymavac