Difference between revisions of "User:Mcmaster/Kms310rt"
(Created page with "Category:mcmaster This page describes the KMS310RT (infinity K2 IND) in detail. Effort was started in effort to better repair them The auto-focus and camera sync featur...") |
m (Mcmaster moved page Kms310rt (Mcmaster) to User:Mcmaster/Kms310rt without leaving a redirect) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
= Optical schematic = | = Optical schematic = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_k2_optic.png|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_to_lamp_schem.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_area_schem.jpg|300 px]] | |
Above: note that BS1 assembly is not aligned. Disk has been removed for clarity | Above: note that BS1 assembly is not aligned. Disk has been removed for clarity | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_objective_to_bs_schem.jpg|300 px]] | |
= Overview = | = Overview = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_overview.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_overview_top.jpg|300 px]] | |
= Aperture/filters = | = Aperture/filters = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_0.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_1.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_2.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_3.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_4.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_aperature_assy_6.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_filter_assy.jpg|300 px]] | |
| Line 42: | Line 42: | ||
Has an FPGA, presumably for auto-focus logic | Has an FPGA, presumably for auto-focus logic | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_board_sticker.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_board_no_sticker.jpg|300 px]] | |
Chips: | Chips: | ||
| Line 55: | Line 55: | ||
= Beam splitter area = | = Beam splitter area = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_aperature.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_area.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_assy_front.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_assy_out.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_assy_side.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_assy_top.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_to_filter.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_bs_to_lamp.jpg|300 px]] | |
| Line 70: | Line 70: | ||
Schematic: M3 | Schematic: M3 | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_defect_area2.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_defect_area.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_defect.jpg|300 px]] | |
During removal additional damage was sustained/noticed. Its possible the original white stuff (mostly?) comes off. Regardless, this needs to be replaced | During removal additional damage was sustained/noticed. Its possible the original white stuff (mostly?) comes off. Regardless, this needs to be replaced | ||
| Line 80: | Line 80: | ||
Schematic: L2 | Schematic: L2 | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_diffusor_btm.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_diffusor_top.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_diffusor_surface.jpg|300 px]] | |
Above: surface irregularities. These show up on microscope images | Above: surface irregularities. These show up on microscope images | ||
| Line 91: | Line 91: | ||
= Nipkow disk assembly = | = Nipkow disk assembly = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_disk1.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_disk2.jpg|300 px]] | |
| − | + | [[File:mcmaster_tech_inst_kms310rt_disk3.jpg|300 px]] | |
= Lamp = | = Lamp = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_lamp.jpg|300 px]] | |
= Observation tube = | = Observation tube = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_reflector_assy.jpg|300 px]] | |
= Objective = | = Objective = | ||
| − | + | [[File:mcmaster_tech_inst_kms310rt_objective_to_bs.jpg|300 px]] | |
Latest revision as of 02:05, 5 March 2019
This page describes the KMS310RT (infinity K2 IND) in detail. Effort was started in effort to better repair them
The auto-focus and camera sync features seem to add considerable complexity. I don't care about auto-focus and am unsure if I need the video sync feature (I should be able to deal with it through camera registers). Unfortunately, these add a considerable number of mirrors etc that need to be clean
Contents
Optical schematic
Above: note that BS1 assembly is not aligned. Disk has been removed for clarity
Overview
Aperture/filters
Main circuit board
Has an FPGA, presumably for auto-focus logic
Chips:
- 74HC14
- MAXIM MAX681 5V to +/-10V converter
- ALTERA EPM5128 FPGA
- NAT SEMI LM1881 VIDEO SYNC SEPARATOR
Beam splitter area
Defective optic: mirror
Schematic: M3
During removal additional damage was sustained/noticed. Its possible the original white stuff (mostly?) comes off. Regardless, this needs to be replaced
Defective optic: diffusor?
Schematic: L2
Above: surface irregularities. These show up on microscope images
I think this is supposed to be a diffuser to make lamp illumination more even. Unfortunately, the surface has warped leading to sharp irregularities in the final images
Nipkow disk assembly
Lamp
Observation tube
Objective
