CSAM - Revision history

0:0:0:0:0:0:0:1 at 03:38, 25 December 2018

2018-12-25T03:38:32Z

0:0:0:0:0:0:0:1 at 03:35, 25 December 2018

2018-12-25T03:35:46Z

Test: Created page with "Appears to give x-ray like images, a sort of high resolution ultrasound like done to see babies before they are born Appears samples are typically immersed in fluid to help w..."

2018-12-24T23:51:47Z

Created page with "Appears to give x-ray like images, a sort of high resolution ultrasound like done to see babies before they are born Appears samples are typically immersed in fluid to help w..."

New page

Appears to give x-ray like images, a sort of high resolution ultrasound like done to see babies before they are born

Appears samples are typically immersed in fluid to help with conduction

CSAM video says range used was "2.5MHz-260MHz". ie this is far out of human hearing range

Vendors:
* [[sonix]]
* [[nsc|North Shore Components, Inc]]
* [[SEMATECH]]
* [[OKOS]]

= Transducer =

non-sonix tranducers for me to try to get my sonix system online

Many types of transducers out there, must be the focused type. ie don't get the straight beam time used for thickness measurements and such

AFAIK flaw detectors are not focused and so probably won't work

beware: some tranducers are marked for freq + focal length, some freq + diameter

There are a large number of Panametrics / Olympus NDT out there: http:''www.olympus-ims.com/data/File/Harrisonic/Harisonic-UT.en.pdf
* Well really they are from one seller. By the looks of it they are from "Krautkramer Branson Incorporated
KB6000 Ultrasonic Test & Data Acquisition System"

* Panametrics ultrasonic transducers - Olympus
* NEW PANAMETRICS WTA-1 PROBE 1.0MHZ TRANSDUCER B331979
* Olympus Harisonic transducers
* Herrmann Ultrasonic Converter Konverter Tranducer 20kHz: too low freq?
* Automation Industries Ultrasonic Transducer (5 pcs)
''' 10 mm 2.25 MHz
* Olympus 20 MHz Contact Transducer M116-RM
* OLYMPUS 20MHZ .125" M116-RM CONTACT TRANSDUCER U8400038 *NEW*
* Automation Industries SMZ 2.25 MHz 90° R 57A3034 Ultrasonic Immersion Transducer

== Olympus Harisonic ==

Part I purchased: Harisonic I2RA1004T 10 MHz .250"Dia 1.25" FOC Ultrasonic Immersion Transducer
* I2: immersion type 2 transducer
* RA: ?
* 10: 10 MHz
* 04: 04/16" => 1/4"
* T: series?

Example Part Number: I3-0508-S-SU
* I3: Transducer Type & Case. Ex: immersion type 3
* 05: Frequency. Ex: 5 MHz
''' 00 = 0.5 MHz
''' 01 = 1.0 MHz
''' 02 = 2.25 MHz
''' 03 = 3.5 MHz
''' 05 = 5.0 MHz
''' 07 = 7.5 MHz
''' 10 = 10 MHz
''' 15 = 15 MHz
''' 20 = 20 MHz
''' 25 = 25 MHz
* 08: element outer diameter 16th of inches. Ex: 8/16" = 1/2"
* S: series. Ex: mediumband
''' S: "mediumband, medium damped, tuned transducers. They are used for general purpose flaw detection, and represent a compromise between high sensitivity and high resolution."
''' R: "broadband, highly damped, tuned transducers. They are used for high resolution, near and far surface flaw detection, and thickness gaging applications"
''' P: "narrowband, lightly damped, tuned transducers. They have high-energy output and penetrating power, but have limited resolving power"
* SU: Connector Type & Location. Ex: straight UHF
''' SM = Straight Microdot
''' RM = Right Angle Microdot
''' SU = Straight UHF
''' RU = Right Angle UHF

=== Immersion ===

"Immersion transducers are specifically designed to test parts partially or wholly immersed in water"

Immersion types have different focus configurations

303 stainless steel housing

Exsample: I3-0308-R-SU-F2.50IN
* F: focus type
''' F: spherical focus. For scanning planes
''' CF: cylindrical focus: focuses on a line. For scanning cylinders
* 2.50IN: 2.5" focal length (in water)

"i-1 and i-2 Style Housings: 0.25 inches (6 mm) diameter elements with 0.375 inches (10 mm) housings"
* Frequency: 2.25 - 25 MHz
* Focus: 0.35 - 5.25"

= OKOS =

* Well put together video showing their system features: http:''www.youtube.com/watch?v=R76IMxhMaJo

@@ Line 5: / Line 5: @@
 CSAM video says range used was "2.5MHz-260MHz".  ie this is far out of human hearing range
@@ Line 89: / Line 84: @@
 * Focus: 0.35 - 5.25"
-= OKOS =
+= Machine vendor =
 * Well put together video showing their system features: [http://www.youtube.com/watch?v=R76IMxhMaJo]

@@ Line 22: / Line 22: @@
 beware: some tranducers are marked for freq + focal length, some freq + diameter
-There are a large number of Panametrics / Olympus NDT out there: http:''www.olympus-ims.com/data/File/Harrisonic/Harisonic-UT.en.pdf
+There are a large number of Panametrics / Olympus NDT out there: [http://www.olympus-ims.com/data/File/Harrisonic/Harisonic-UT.en.pdf]
 * Well really they are from one seller.  By the looks of it they are from "Krautkramer Branson Incorporated
 KB6000 Ultrasonic Test & Data Acquisition System"
@@ Line 31: / Line 31: @@
 * Herrmann Ultrasonic Converter Konverter Tranducer 20kHz: too low freq?
 * Automation Industries Ultrasonic Transducer (5 pcs)
-''' 10 mm 2.25 MHz
+** 10 mm 2.25 MHz
 * Olympus 20 MHz Contact Transducer M116-RM
 * OLYMPUS 20MHZ .125" M116-RM CONTACT TRANSDUCER U8400038 *NEW*
@@ Line 48: / Line 48: @@
 * I3: Transducer Type & Case.  Ex: immersion type 3
 * 05: Frequency.  Ex: 5 MHz
-''' 00 = 0.5 MHz
+** 00 = 0.5 MHz
-''' 01 = 1.0 MHz
+** 01 = 1.0 MHz
-''' 02 = 2.25 MHz
+** 02 = 2.25 MHz
-''' 03 = 3.5 MHz
+** 03 = 3.5 MHz
-''' 05 = 5.0 MHz
+** 05 = 5.0 MHz
-''' 07 = 7.5 MHz
+** 07 = 7.5 MHz
-''' 10 = 10 MHz
+** 10 = 10 MHz
-''' 15 = 15 MHz
+** 15 = 15 MHz
-''' 20 = 20 MHz
+** 20 = 20 MHz
-''' 25 = 25 MHz
+** 25 = 25 MHz
 * 08: element outer diameter 16th of inches.  Ex: 8/16" = 1/2"
 * S: series.  Ex: mediumband
-''' S: "mediumband, medium damped, tuned transducers. They are used for general purpose flaw detection, and represent a compromise between high sensitivity and high resolution."
+** S: "mediumband, medium damped, tuned transducers. They are used for general purpose flaw detection, and represent a compromise between high sensitivity and high resolution."
-''' R: "broadband, highly damped, tuned transducers. They are used for high resolution, near and far surface flaw detection, and thickness gaging applications"
+** R: "broadband, highly damped, tuned transducers. They are used for high resolution, near and far surface flaw detection, and thickness gaging applications"
-''' P: "narrowband, lightly damped, tuned transducers. They have high-energy output and penetrating power, but have limited resolving power"
+** P: "narrowband, lightly damped, tuned transducers. They have high-energy output and penetrating power, but have limited resolving power"
 * SU: Connector Type & Location.  Ex: straight UHF
-''' SM = Straight Microdot
+** SM = Straight Microdot
-''' RM = Right Angle Microdot
+** RM = Right Angle Microdot
-''' SU = Straight UHF
+** SU = Straight UHF
-''' RU = Right Angle UHF
+** RU = Right Angle UHF
@@ Line 80: / Line 80: @@
 Exsample: I3-0308-R-SU-F2.50IN
 * F: focus type
-''' F: spherical focus.  For scanning planes
+** F: spherical focus.  For scanning planes
-''' CF: cylindrical focus: focuses on a line.  For scanning cylinders
+** CF: cylindrical focus: focuses on a line.  For scanning cylinders
 * 2.50IN: 2.5" focal length (in water)
@@ Line 91: / Line 91: @@
 = OKOS =
-* Well put together video showing their system features: http:''www.youtube.com/watch?v=R76IMxhMaJo
+* Well put together video showing their system features: [http://www.youtube.com/watch?v=R76IMxhMaJo]