Small Microscope
Originally created while researching basic microscopes for McMaster SCA/FI workstation. These need to see a rough idea of a die position, but not resolve individual transistors. Goals were:
- Light enough to mount on 3018 Pro CNC Z axis
- Compact => not get in the way of other tools such as laser
- Relatively inexpensive (no more than $300?)
McMaster 2022-03-10 summary:
- Currently using a Jiusion-1000x, although its just barely enough for my application (hard to tell if laser is fully focused)
- Tried a USB2-MICRO-250X. Not enough magnification for me but otherwise nice
- Ordered a surplus Dino-Lite AD4013MT, a high end USB microscope
- Ordered a Nikon CM-10A from eBay Japan
- A local friend has an Optem system I might be able to test
Contents
USB microscope
Dino-Lite
These are the most common professional option in this category. Common models appear to be the AM2111 (basic, ~$100) and AM3111 (more LEDs, variable brightness, $150). However they have relatively low resolution (0.3 MP)
https://github.com/miked63017/dinolite_uvc_led_control
AD-4013MT
McMaster: ordered "Dino-Lite Premier2 1280x1024 USB Microscope AD-4013MT" for $300 on eBay. With a 1.3 MP camera I'm hoping this will produce a pretty decent image.
"The AD4013MT handheld digital microscope is a 1.3 MP camera with an aluminum alloy housing and interchangeable nozzle feature and a max resolution of 1280 x 1024. The MicroTouch feature on the handheld digital microscope gives users the option of taking a picture right from the scope itself. This model comes with both a standard open faced nozzle as well as a sealed transparent cap nozzle designed to protect the lens and built in LED lights from dust, debris and moisture common to certain work environments. The removable nozzle feature also provides the user the option of increasing working distance when using the digital microscope without any nozzle installed."
Jiusion-1000x
One of the least expensive microscopes on Amazon.
McMaster:
- The first laser workstation used one of these
- Usable for my application but just barely. Try to replace with something I enjoy using more
- Knob changes both focus and zoom
- Plastic cap can be removed
- Needed more tension to keep balls stable
- Locking nut was replaced with a 1/4-20 bolt after drilling through
- USB combination cable is unreliable / bad contact sometimes
- Ground off mounting stand and epoxied the remaining ball + shaft into a 3D printed adapter to allow mounting the microscope to t-slot
USB2-MICRO-250X
McMaster: fixed zoom which unfortunately wasn't enough for my application. Otherwise I liked the focus knob
QX3/QX5
https://www.microscopemaster.com/digital-blue-microscope.html
Could be interesting to try....QX5 can be had for $15 on eBay
Modular tube
These can be used to make custom microscope assemblies. Some of these support epi illumination as well as ring illumination.
Optem
Edmund?
edmunds compact
https://www.edmundoptics.com/f/compact-telecentric-lenses/13816/
infinistix
Interesting but wasn't clear if enough magnification
Simple microscope
These are purpose built microscopes with more integrated chassis supporting typically a single viewing port and a single objective.
Mitutoyo VMU
Nikon CM
http://www.ckpi.net/Catalog_Nikon/Nikon%20CMseries.pdf
McMaster: although these are generally fairly expensive on eBay, I found one for $80. Let's see how it does!
