Microwiki - User contributions [en]

DCI Drive

2019-09-19T04:39:31Z

Azonenberg: /* Stage */

DCI stepper motor driver.

==Stage==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

Bottom of stage has four holes in a 2x2 grid. Holes are tapped for 10-32 machine screws.

ID of holes is 4.15 mm.

Pitch of holes in short axis (direction of motion): 50.53 mm

Pitch of holes in long axis: 79.55 mm

Top of stage has six 10-32 holes in a 2x3 grid. Spacing in both axes is 50.53 mm.

==Joystick==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

==Drive==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{| class="wikitable"
!Pin number!!Wire color!!Function
|-
|1||Black||Ground
|-
|5||Orange||+10V power to joystick
|-
|9||Yellow||X axis step
|-
|10||Green||Y axis step
|-
|11||Red||X axis direction
|-
|12||Brown||Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-09-05T03:22:07Z

Azonenberg: Hole pattern

DCI stepper motor driver.

==Stage==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

Bottom of stage has four holes in a 2x2 grid. Holes are tapped for 10-32 machine screws.

ID of holes is 4.15 mm.

Pitch of holes in short axis (direction of motion): 50.53 mm

Pitch of holes in long axis: 79.55 mm

==Joystick==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

==Drive==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{| class="wikitable"
!Pin number!!Wire color!!Function
|-
|1||Black||Ground
|-
|5||Orange||+10V power to joystick
|-
|9||Yellow||X axis step
|-
|10||Green||Y axis step
|-
|11||Red||X axis direction
|-
|12||Brown||Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

Olympus BH

2019-09-05T02:57:57Z

Azonenberg: /* Base plate */

[[Category:Olympus]]

=Part list=

==Model==

TODO: add standard metallurgical

{| class="wikitable sortable" border="1"
!Image!!Name!!Description!!Notes
|-
|[[File:olympus_series_bh_microscope_system1.jpg|300 px]] Source: [BH microscope, cover] [[BHA]||Bottom illumination, removable nosepiece||
|-
| ||[[BHB]]||Bottom illumination, fixed nosepiece||
|-
| ||[[BHC]]||Bottom illumination, fixed nosepiece, integrated light source||
|-
| ||[[BHMJ-02]]||Epi-illumination, sliding stanmd, BF, monocular||
|-
| ||[[BHMJ-22]]||Epi-illumination, sliding stanmd, BF, binocular||
|-
|[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]] Source: [instruction BHMJ/-N, 3] [[BHMJ-42]|| ||Epi-illumination, sliding stanmd, BF, trinocular||
|-
| ||[[BHMJ-02-N]]||Epi-illumination, sliding stanmd, BF/DF, monocular||
|-
| ||[[BHMJ-22-N]]||Epi-illumination, sliding stanmd, BF/DF, binocular||
|-
| ||[[BHMJ-42-N]]||Epi-illumination, sliding stanmd, BF/DF, trinocular||
|-
|}

==Objective==

M is BF only. Neo are BF/DF. All are M25 threaded

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[M5X]]||Objective||5x||
|-
| ||[[M10X]]||Objective||10x||
|-
| ||[[M20X]]||Objective||20x||
|-
| ||[[M40X]]||Objective||40x||
|-
| ||[[Neo5X]]||Objective||5x||
|-
| ||[[Neo10X]]||Objective||10x||
|-
| ||[[Neo20X]]||Objective||20x||
|-
| ||[[Neo40X]]||Objective||40x||
|-
| ||[[BH-RE]]||Nosepiece||Quintuple||
|-
| ||[[BH-RE]]||Nosepiece|| ||
|-
| ||[[BH-NRE]]||Nosepiece|| ||
|-
|}

==Illuminator==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[BH-MA]]||Illuminator (vertical)||Brightfield||
|-
| ||[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield||
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse||Tungsten, 30W||Pre-centered
|-
| ||[[BH-LHM]]||Lamphouse||Tungsten||
|-
|[[File:olympus_series_bh_microscope_bh-lsh.png|300 px]] Source: [BH microscope, 9] [[BH-LSH]||Lamphouse||Halogen 100W||Centerable
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse|| ||
|-
|[[File:olympus_series_bh_microscope_ls30.png|100 px]] Source: [BH microscope, 9] [[LS30]||Bulb||6V, 30W tungsten||
|-
|[[File:olympus_series_bh_microscope_ls15.png|100 px]] Source: [BH microscope, 9] [[LS15]||Bulb||6V, 15W tungsten||
|-
| ||[[FK5X]]||Eyepiece, photo||5x||
|-
| ||[[TF]]||Power supply||Transformer||voltage range?
|-
| ||[[45C]]||Filter||for what?||
|-
|[[File:olympus_series_bh_microscope_jc12v_100w.png|150 px]] Source: [BH microscope, 9] [[jc12v 100W]||Bulb||Halogen||
|-
|}

==Observation tube==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[CH-M045]]||Observation tube||Monocular||
|-
|[[File:olympus_series_bh_microscope_bh-swtr.png|300 px]] Source: [BH microscope, 11] [[BH-SWTR]||Observation tube||Binocular w/ photo?||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI30]||Observation tube||Binocular, 30 degree||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI45]||Observation tube||Binocular, 45 degree||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR30]||Observation tube||Binocular, 30 degree (w/ photo)||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR45]||Observation tube||Binocular, 45 degree (w/ photo)||
|-
| ||[[BiWF10X]]||Eyepiece||HEP, paired||
|-
|[[File:olympus_series_bh_microscope_emm-vi.png|300 px]] Source: [BH microscope, 15] [[EMM-VI]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35l2a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35L2A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35m.png|300 px]] Source: [BH microscope, 15] [[PM-10-35M]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-6.png|300 px]] Source: [BH microscope, 15] [[PM-6]|| || ||
|-
|}

==Misc==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
|[[File:zoidberg_bh_neo_turret.jpg|200 px]] [[BH-RE]||Nosepiece||Quintuple||Neo objectives (M25)
|-
|[[File:olympus_series_bh_microscope_bha-f.png|300 px]] Source: [BH microscope, 9] [[BHA-F]||Stand||Bottom illumination, removable nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhb-f.png|300 px]] Source: [BH microscope, 9] [[BHB-F]||Stand||Bottom illumination, fixed nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhc-f.png|300 px]] Source: [BH microscope, 9] [[BHC-F]||Stand||Bottom illumination, fixed nosepiece, integrated light||Lowest cost?
|-
|[[File:olympus_series_bh_microscope_bh-sv.png|300 px]] Source: [BH microscope, 13] [[BH-SV]||Stage|| ||
|-
|[[File:olympus_series_bh_microscope_bh-cd.png|300 px]] Source: [BH microscope, 13] [[BH-CD]||Condenser||Abbe||
|-
|[[File:olympus_series_bh_microscope_bh-aac.png|300 px]] Source: [BH microscope, 13] [[BH-AAC]||Condenser||Ach/Apla||
|-
| ||[[BHMJ-ST]], [[BHMJ-F]]||Body/base||
|-
| ||[[FK3.3X]]||Photo eyepiece|| ||
|-
| ||[[32.5C]]||Blue filter||
|-
|[[File:olympus_series_bh_microscope_ah-ca.png|300 px]] Source: [BH microscope, 11] [[AH-CA]|| ||
|-
|[[File:olympus_series_bh_microscope_ah-fa.png|300 px]] Source: [BH microscope, 11] [[AH-FA]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcd.png|300 px]] Source: [BH microscope, 13] [[BH-DCD]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcw.png|300 px]] Source: [BH microscope, 13] [[BH-DCW]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-pc.png|300 px]] Source: [BH microscope, 13] [[BH-PC]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-sh.png|300 px]] Source: [BH microscope, 13] [[BH-SH]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-swc.png|300 px]] Source: [BH microscope, 13] [[BH-SWC]|| ||
|-
|}

=BHA/BHB/BHC configurations=

[[File:olympus_series_bh_microscope_system1.jpg|300 px]]

Above: probably a BHA. Source: [BH microscope, cover]

Source: [BH microscope, 18]

NOTE: -1, -2, etc are my notation for the color columns in [BH microscope, 18]

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHA-1!!BHA-2!!BHA-3!!BHA-4!!BHB-1!!BHB-2!!BHB-3!!BHB-4!!BHC-1!!BHC-2
|-
|[[BHA-F]]||Stand|| ||Y||Y||Y||Y|| || || || || ||
|-
|[[BHB-F]]||Stand|| || || || || ||Y||Y||Y||Y|| ||
|-
|[[BHC-F]]||Stand|| || || || || || || || || ||Y||Y
|-
|[[BH-RE]]||Nosepiece||Quintuple||Y||Y||Y||Y|| || || || || ||
|-
|[[BH-LH]]||Lamphouse|| ||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS30]]||Bulb||6V, 30W||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS15]]||Bulb||6V, 15W|| || || || || || || || ||Y||Y
|-
|[[BH-BI45]]||Observation tube||45 deg binocular|| ||Y|| ||Y|| ||Y|| ||Y|| ||Y
|-
|[[BH-TR45]]||Observation tube||45 deg trinocular||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[BH-SV]]||Stage|| ||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-CD]]||Condenser||Abbe|| || ||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-AAC]]||Condenser||Ach/Apla||Y||Y|| || || || || || || ||
|-
| ||Objective||Achromat 4x, 10x, S-40x (spring), S-100x (spring, oil) set|| || ||Y||Y|| || ||Y||Y||Y||Y
|-
| ||Objective||Plan achromat 4x, 10x, 40x (spring), 100x (spring, oil) set||Y||Y|| || ||Y||Y|| || || ||
|-
| ||Objective||Plan achromat 20x (spring)||Y||Y|| || || || || || || ||
|-
|[[BiWF10X]]||Eyepiece||HEP, paired||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[FK5X]]||Eyepiece, photo||5x||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[45C]]||Filter||for what?|| || || || || || || || || ||
|-
| ||Bulb||Spare bulb (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Fuse||Spare fuse (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Oil||Immersion oil||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Cover||Vintyl dust cover||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|}

=BHMJ configurations=

[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]]

Above: A BHMJ, probably a BHMJ-42. Source: [instruction BHMJ/-N, 3]

Source: [instruction BHMJ/-N, 2]

-N adds darkfield

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHMJ-02!!BHMJ-22!!BHMJ-42!!BHMJ-02-N!!BHMJ-22-N!!BHMJ-42-N
|-
|[[BHMJ-ST]], [[BHMJ-F]]||Body/base|| ||Y||Y||Y||Y||Y||Y
|-
|[[BH-RE]]||Nosepiece|| ||Y||Y||Y|| || ||
|-
|[[BH-NRE]]||Nosepiece|| || || || ||Y||Y||Y
|-
|[[BH-MA]]||Illuminator (vertical)||Brightfield||Y||Y||Y|| || ||
|-
|[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield|| || || ||Y||Y||Y
|-
|[[CH-M045]]||Observation tube||Monocular||Y|| || ||Y|| ||
|-
|[[BH-BI45]]||Observation tube||Monocular|| ||Y|| || ||Y||
|-
|[[BH-TR45]]||Observation tube||Binocular (w/ photo)|| || ||Y|| || ||Y
|-
|[[BH-LHM]]||Lamphouse||Tungsten||Y||Y||Y||Y||Y||Y
|-
|[[LS15]]||Bulb||15W tungsten||Y||Y||Y||Y||Y||Y
|-
|[[TF]]||Power supply||Transformer||Y||Y||Y||Y||Y||Y
|-
|[[M5X]] [[M10X]] [[M20X]] [[M40X]]||Objective||Set||Y||Y||Y|| || ||
|-
|[[Neo5X]] [[Neo10X]] [[Neo20X]] [[Neo40x]]||Objective||Set|| || || ||Y||Y||Y
|-
| ||High eyepoint BiWF10X,paired eyepiece|| ||Y||Y|| ||Y||Y
|-
| ||High eyepoint WF10X eyepiece||Y|| || ||Y|| ||
|-
|[[FK3.3X]]||Photo eyepiece|| || ||Y|| || ||Y
|-
| ||Stage plate||Y||Y||Y||Y||Y||Y
|-
| ||Stage clips||Y||Y||Y||Y||Y||Y
|-
| ||Eyepiece caps|| ||Y||Y|| ||Y||Y
|-
|[[32.5C]]||Blue filter||Y||Y||Y||Y||Y||Y
|-
| ||Vinyl dust cover||Y||Y||Y||Y||Y||Y
|-
|}

=Measurements=
Taken from Andrew Zonenberg's BHM unless otherwise stated.

===Base plate===
Attaches to microscope frame with four M6x1.0 screws, 15 mm long, in a 2x2 hole pattern. Screw heads are 9.9 mm OD.

Base plate has 6.7mm clearance holes, scope body is tapped.
[[File:Hole-pattern.png|none|thumb|BHM hole pattern]]
Approx 135 mm front-to-back from center of microscope frame to sample.

=References=

*Olympus Series BH System Microscope [BH microscope]: [http://www.alanwood.net/downloads/olympus-bh-bha-bhb-bhc-brochure.pdf]
*Olympus metallurgical microscopes instruction manual, models BHMJ & BHMJ-N [instruction BHMJ/-N]: [http://www.alanwood.net/downloads/olympus-bhmj-bhmj-n-instructions.pdf]

File:Hole-pattern.png

2019-09-05T02:56:50Z

Azonenberg:

Olympus BHM base plate drill pattern

Olympus BH

2019-09-05T02:56:01Z

Azonenberg: /* Base plate */

[[Category:Olympus]]

=Part list=

==Model==

TODO: add standard metallurgical

{| class="wikitable sortable" border="1"
!Image!!Name!!Description!!Notes
|-
|[[File:olympus_series_bh_microscope_system1.jpg|300 px]] Source: [BH microscope, cover] [[BHA]||Bottom illumination, removable nosepiece||
|-
| ||[[BHB]]||Bottom illumination, fixed nosepiece||
|-
| ||[[BHC]]||Bottom illumination, fixed nosepiece, integrated light source||
|-
| ||[[BHMJ-02]]||Epi-illumination, sliding stanmd, BF, monocular||
|-
| ||[[BHMJ-22]]||Epi-illumination, sliding stanmd, BF, binocular||
|-
|[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]] Source: [instruction BHMJ/-N, 3] [[BHMJ-42]|| ||Epi-illumination, sliding stanmd, BF, trinocular||
|-
| ||[[BHMJ-02-N]]||Epi-illumination, sliding stanmd, BF/DF, monocular||
|-
| ||[[BHMJ-22-N]]||Epi-illumination, sliding stanmd, BF/DF, binocular||
|-
| ||[[BHMJ-42-N]]||Epi-illumination, sliding stanmd, BF/DF, trinocular||
|-
|}

==Objective==

M is BF only. Neo are BF/DF. All are M25 threaded

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[M5X]]||Objective||5x||
|-
| ||[[M10X]]||Objective||10x||
|-
| ||[[M20X]]||Objective||20x||
|-
| ||[[M40X]]||Objective||40x||
|-
| ||[[Neo5X]]||Objective||5x||
|-
| ||[[Neo10X]]||Objective||10x||
|-
| ||[[Neo20X]]||Objective||20x||
|-
| ||[[Neo40X]]||Objective||40x||
|-
| ||[[BH-RE]]||Nosepiece||Quintuple||
|-
| ||[[BH-RE]]||Nosepiece|| ||
|-
| ||[[BH-NRE]]||Nosepiece|| ||
|-
|}

==Illuminator==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[BH-MA]]||Illuminator (vertical)||Brightfield||
|-
| ||[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield||
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse||Tungsten, 30W||Pre-centered
|-
| ||[[BH-LHM]]||Lamphouse||Tungsten||
|-
|[[File:olympus_series_bh_microscope_bh-lsh.png|300 px]] Source: [BH microscope, 9] [[BH-LSH]||Lamphouse||Halogen 100W||Centerable
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse|| ||
|-
|[[File:olympus_series_bh_microscope_ls30.png|100 px]] Source: [BH microscope, 9] [[LS30]||Bulb||6V, 30W tungsten||
|-
|[[File:olympus_series_bh_microscope_ls15.png|100 px]] Source: [BH microscope, 9] [[LS15]||Bulb||6V, 15W tungsten||
|-
| ||[[FK5X]]||Eyepiece, photo||5x||
|-
| ||[[TF]]||Power supply||Transformer||voltage range?
|-
| ||[[45C]]||Filter||for what?||
|-
|[[File:olympus_series_bh_microscope_jc12v_100w.png|150 px]] Source: [BH microscope, 9] [[jc12v 100W]||Bulb||Halogen||
|-
|}

==Observation tube==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[CH-M045]]||Observation tube||Monocular||
|-
|[[File:olympus_series_bh_microscope_bh-swtr.png|300 px]] Source: [BH microscope, 11] [[BH-SWTR]||Observation tube||Binocular w/ photo?||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI30]||Observation tube||Binocular, 30 degree||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI45]||Observation tube||Binocular, 45 degree||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR30]||Observation tube||Binocular, 30 degree (w/ photo)||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR45]||Observation tube||Binocular, 45 degree (w/ photo)||
|-
| ||[[BiWF10X]]||Eyepiece||HEP, paired||
|-
|[[File:olympus_series_bh_microscope_emm-vi.png|300 px]] Source: [BH microscope, 15] [[EMM-VI]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35l2a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35L2A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35m.png|300 px]] Source: [BH microscope, 15] [[PM-10-35M]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-6.png|300 px]] Source: [BH microscope, 15] [[PM-6]|| || ||
|-
|}

==Misc==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
|[[File:zoidberg_bh_neo_turret.jpg|200 px]] [[BH-RE]||Nosepiece||Quintuple||Neo objectives (M25)
|-
|[[File:olympus_series_bh_microscope_bha-f.png|300 px]] Source: [BH microscope, 9] [[BHA-F]||Stand||Bottom illumination, removable nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhb-f.png|300 px]] Source: [BH microscope, 9] [[BHB-F]||Stand||Bottom illumination, fixed nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhc-f.png|300 px]] Source: [BH microscope, 9] [[BHC-F]||Stand||Bottom illumination, fixed nosepiece, integrated light||Lowest cost?
|-
|[[File:olympus_series_bh_microscope_bh-sv.png|300 px]] Source: [BH microscope, 13] [[BH-SV]||Stage|| ||
|-
|[[File:olympus_series_bh_microscope_bh-cd.png|300 px]] Source: [BH microscope, 13] [[BH-CD]||Condenser||Abbe||
|-
|[[File:olympus_series_bh_microscope_bh-aac.png|300 px]] Source: [BH microscope, 13] [[BH-AAC]||Condenser||Ach/Apla||
|-
| ||[[BHMJ-ST]], [[BHMJ-F]]||Body/base||
|-
| ||[[FK3.3X]]||Photo eyepiece|| ||
|-
| ||[[32.5C]]||Blue filter||
|-
|[[File:olympus_series_bh_microscope_ah-ca.png|300 px]] Source: [BH microscope, 11] [[AH-CA]|| ||
|-
|[[File:olympus_series_bh_microscope_ah-fa.png|300 px]] Source: [BH microscope, 11] [[AH-FA]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcd.png|300 px]] Source: [BH microscope, 13] [[BH-DCD]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcw.png|300 px]] Source: [BH microscope, 13] [[BH-DCW]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-pc.png|300 px]] Source: [BH microscope, 13] [[BH-PC]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-sh.png|300 px]] Source: [BH microscope, 13] [[BH-SH]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-swc.png|300 px]] Source: [BH microscope, 13] [[BH-SWC]|| ||
|-
|}

=BHA/BHB/BHC configurations=

[[File:olympus_series_bh_microscope_system1.jpg|300 px]]

Above: probably a BHA. Source: [BH microscope, cover]

Source: [BH microscope, 18]

NOTE: -1, -2, etc are my notation for the color columns in [BH microscope, 18]

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHA-1!!BHA-2!!BHA-3!!BHA-4!!BHB-1!!BHB-2!!BHB-3!!BHB-4!!BHC-1!!BHC-2
|-
|[[BHA-F]]||Stand|| ||Y||Y||Y||Y|| || || || || ||
|-
|[[BHB-F]]||Stand|| || || || || ||Y||Y||Y||Y|| ||
|-
|[[BHC-F]]||Stand|| || || || || || || || || ||Y||Y
|-
|[[BH-RE]]||Nosepiece||Quintuple||Y||Y||Y||Y|| || || || || ||
|-
|[[BH-LH]]||Lamphouse|| ||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS30]]||Bulb||6V, 30W||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS15]]||Bulb||6V, 15W|| || || || || || || || ||Y||Y
|-
|[[BH-BI45]]||Observation tube||45 deg binocular|| ||Y|| ||Y|| ||Y|| ||Y|| ||Y
|-
|[[BH-TR45]]||Observation tube||45 deg trinocular||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[BH-SV]]||Stage|| ||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-CD]]||Condenser||Abbe|| || ||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-AAC]]||Condenser||Ach/Apla||Y||Y|| || || || || || || ||
|-
| ||Objective||Achromat 4x, 10x, S-40x (spring), S-100x (spring, oil) set|| || ||Y||Y|| || ||Y||Y||Y||Y
|-
| ||Objective||Plan achromat 4x, 10x, 40x (spring), 100x (spring, oil) set||Y||Y|| || ||Y||Y|| || || ||
|-
| ||Objective||Plan achromat 20x (spring)||Y||Y|| || || || || || || ||
|-
|[[BiWF10X]]||Eyepiece||HEP, paired||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[FK5X]]||Eyepiece, photo||5x||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[45C]]||Filter||for what?|| || || || || || || || || ||
|-
| ||Bulb||Spare bulb (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Fuse||Spare fuse (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Oil||Immersion oil||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Cover||Vintyl dust cover||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|}

=BHMJ configurations=

[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]]

Above: A BHMJ, probably a BHMJ-42. Source: [instruction BHMJ/-N, 3]

Source: [instruction BHMJ/-N, 2]

-N adds darkfield

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHMJ-02!!BHMJ-22!!BHMJ-42!!BHMJ-02-N!!BHMJ-22-N!!BHMJ-42-N
|-
|[[BHMJ-ST]], [[BHMJ-F]]||Body/base|| ||Y||Y||Y||Y||Y||Y
|-
|[[BH-RE]]||Nosepiece|| ||Y||Y||Y|| || ||
|-
|[[BH-NRE]]||Nosepiece|| || || || ||Y||Y||Y
|-
|[[BH-MA]]||Illuminator (vertical)||Brightfield||Y||Y||Y|| || ||
|-
|[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield|| || || ||Y||Y||Y
|-
|[[CH-M045]]||Observation tube||Monocular||Y|| || ||Y|| ||
|-
|[[BH-BI45]]||Observation tube||Monocular|| ||Y|| || ||Y||
|-
|[[BH-TR45]]||Observation tube||Binocular (w/ photo)|| || ||Y|| || ||Y
|-
|[[BH-LHM]]||Lamphouse||Tungsten||Y||Y||Y||Y||Y||Y
|-
|[[LS15]]||Bulb||15W tungsten||Y||Y||Y||Y||Y||Y
|-
|[[TF]]||Power supply||Transformer||Y||Y||Y||Y||Y||Y
|-
|[[M5X]] [[M10X]] [[M20X]] [[M40X]]||Objective||Set||Y||Y||Y|| || ||
|-
|[[Neo5X]] [[Neo10X]] [[Neo20X]] [[Neo40x]]||Objective||Set|| || || ||Y||Y||Y
|-
| ||High eyepoint BiWF10X,paired eyepiece|| ||Y||Y|| ||Y||Y
|-
| ||High eyepoint WF10X eyepiece||Y|| || ||Y|| ||
|-
|[[FK3.3X]]||Photo eyepiece|| || ||Y|| || ||Y
|-
| ||Stage plate||Y||Y||Y||Y||Y||Y
|-
| ||Stage clips||Y||Y||Y||Y||Y||Y
|-
| ||Eyepiece caps|| ||Y||Y|| ||Y||Y
|-
|[[32.5C]]||Blue filter||Y||Y||Y||Y||Y||Y
|-
| ||Vinyl dust cover||Y||Y||Y||Y||Y||Y
|-
|}

=Measurements=
Taken from Andrew Zonenberg's BHM unless otherwise stated.

===Base plate===
Attaches to microscope frame with four M6x1.0 screws, 15mm long, in a 2x2 hole pattern. Base plate has 6.7mm clearance holes, scope body is tapped.

Back row: outside to outside 42.7 mm so center to center 36 mm

Front row: outside to outside 50.5 mm so center to center 43.8 mm

Row spacing (diagonal): outside to outside 46.9 mm so center to center 40.2 mm, 40mm row linear row spacing

Screw heads are 9.9mm OD.

Approx 135 mm front-to-back from center of microscope frame to sample

=References=

*Olympus Series BH System Microscope [BH microscope]: [http://www.alanwood.net/downloads/olympus-bh-bha-bhb-bhc-brochure.pdf]
*Olympus metallurgical microscopes instruction manual, models BHMJ & BHMJ-N [instruction BHMJ/-N]: [http://www.alanwood.net/downloads/olympus-bhmj-bhmj-n-instructions.pdf]

Olympus BH

2019-09-05T02:49:03Z

Azonenberg: /* Base plate */

[[Category:Olympus]]

=Part list=

==Model==

TODO: add standard metallurgical

{| class="wikitable sortable" border="1"
!Image!!Name!!Description!!Notes
|-
|[[File:olympus_series_bh_microscope_system1.jpg|300 px]] Source: [BH microscope, cover] [[BHA]||Bottom illumination, removable nosepiece||
|-
| ||[[BHB]]||Bottom illumination, fixed nosepiece||
|-
| ||[[BHC]]||Bottom illumination, fixed nosepiece, integrated light source||
|-
| ||[[BHMJ-02]]||Epi-illumination, sliding stanmd, BF, monocular||
|-
| ||[[BHMJ-22]]||Epi-illumination, sliding stanmd, BF, binocular||
|-
|[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]] Source: [instruction BHMJ/-N, 3] [[BHMJ-42]|| ||Epi-illumination, sliding stanmd, BF, trinocular||
|-
| ||[[BHMJ-02-N]]||Epi-illumination, sliding stanmd, BF/DF, monocular||
|-
| ||[[BHMJ-22-N]]||Epi-illumination, sliding stanmd, BF/DF, binocular||
|-
| ||[[BHMJ-42-N]]||Epi-illumination, sliding stanmd, BF/DF, trinocular||
|-
|}

==Objective==

M is BF only. Neo are BF/DF. All are M25 threaded

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[M5X]]||Objective||5x||
|-
| ||[[M10X]]||Objective||10x||
|-
| ||[[M20X]]||Objective||20x||
|-
| ||[[M40X]]||Objective||40x||
|-
| ||[[Neo5X]]||Objective||5x||
|-
| ||[[Neo10X]]||Objective||10x||
|-
| ||[[Neo20X]]||Objective||20x||
|-
| ||[[Neo40X]]||Objective||40x||
|-
| ||[[BH-RE]]||Nosepiece||Quintuple||
|-
| ||[[BH-RE]]||Nosepiece|| ||
|-
| ||[[BH-NRE]]||Nosepiece|| ||
|-
|}

==Illuminator==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[BH-MA]]||Illuminator (vertical)||Brightfield||
|-
| ||[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield||
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse||Tungsten, 30W||Pre-centered
|-
| ||[[BH-LHM]]||Lamphouse||Tungsten||
|-
|[[File:olympus_series_bh_microscope_bh-lsh.png|300 px]] Source: [BH microscope, 9] [[BH-LSH]||Lamphouse||Halogen 100W||Centerable
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse|| ||
|-
|[[File:olympus_series_bh_microscope_ls30.png|100 px]] Source: [BH microscope, 9] [[LS30]||Bulb||6V, 30W tungsten||
|-
|[[File:olympus_series_bh_microscope_ls15.png|100 px]] Source: [BH microscope, 9] [[LS15]||Bulb||6V, 15W tungsten||
|-
| ||[[FK5X]]||Eyepiece, photo||5x||
|-
| ||[[TF]]||Power supply||Transformer||voltage range?
|-
| ||[[45C]]||Filter||for what?||
|-
|[[File:olympus_series_bh_microscope_jc12v_100w.png|150 px]] Source: [BH microscope, 9] [[jc12v 100W]||Bulb||Halogen||
|-
|}

==Observation tube==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[CH-M045]]||Observation tube||Monocular||
|-
|[[File:olympus_series_bh_microscope_bh-swtr.png|300 px]] Source: [BH microscope, 11] [[BH-SWTR]||Observation tube||Binocular w/ photo?||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI30]||Observation tube||Binocular, 30 degree||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI45]||Observation tube||Binocular, 45 degree||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR30]||Observation tube||Binocular, 30 degree (w/ photo)||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR45]||Observation tube||Binocular, 45 degree (w/ photo)||
|-
| ||[[BiWF10X]]||Eyepiece||HEP, paired||
|-
|[[File:olympus_series_bh_microscope_emm-vi.png|300 px]] Source: [BH microscope, 15] [[EMM-VI]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35l2a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35L2A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35m.png|300 px]] Source: [BH microscope, 15] [[PM-10-35M]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-6.png|300 px]] Source: [BH microscope, 15] [[PM-6]|| || ||
|-
|}

==Misc==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
|[[File:zoidberg_bh_neo_turret.jpg|200 px]] [[BH-RE]||Nosepiece||Quintuple||Neo objectives (M25)
|-
|[[File:olympus_series_bh_microscope_bha-f.png|300 px]] Source: [BH microscope, 9] [[BHA-F]||Stand||Bottom illumination, removable nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhb-f.png|300 px]] Source: [BH microscope, 9] [[BHB-F]||Stand||Bottom illumination, fixed nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhc-f.png|300 px]] Source: [BH microscope, 9] [[BHC-F]||Stand||Bottom illumination, fixed nosepiece, integrated light||Lowest cost?
|-
|[[File:olympus_series_bh_microscope_bh-sv.png|300 px]] Source: [BH microscope, 13] [[BH-SV]||Stage|| ||
|-
|[[File:olympus_series_bh_microscope_bh-cd.png|300 px]] Source: [BH microscope, 13] [[BH-CD]||Condenser||Abbe||
|-
|[[File:olympus_series_bh_microscope_bh-aac.png|300 px]] Source: [BH microscope, 13] [[BH-AAC]||Condenser||Ach/Apla||
|-
| ||[[BHMJ-ST]], [[BHMJ-F]]||Body/base||
|-
| ||[[FK3.3X]]||Photo eyepiece|| ||
|-
| ||[[32.5C]]||Blue filter||
|-
|[[File:olympus_series_bh_microscope_ah-ca.png|300 px]] Source: [BH microscope, 11] [[AH-CA]|| ||
|-
|[[File:olympus_series_bh_microscope_ah-fa.png|300 px]] Source: [BH microscope, 11] [[AH-FA]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcd.png|300 px]] Source: [BH microscope, 13] [[BH-DCD]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcw.png|300 px]] Source: [BH microscope, 13] [[BH-DCW]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-pc.png|300 px]] Source: [BH microscope, 13] [[BH-PC]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-sh.png|300 px]] Source: [BH microscope, 13] [[BH-SH]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-swc.png|300 px]] Source: [BH microscope, 13] [[BH-SWC]|| ||
|-
|}

=BHA/BHB/BHC configurations=

[[File:olympus_series_bh_microscope_system1.jpg|300 px]]

Above: probably a BHA. Source: [BH microscope, cover]

Source: [BH microscope, 18]

NOTE: -1, -2, etc are my notation for the color columns in [BH microscope, 18]

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHA-1!!BHA-2!!BHA-3!!BHA-4!!BHB-1!!BHB-2!!BHB-3!!BHB-4!!BHC-1!!BHC-2
|-
|[[BHA-F]]||Stand|| ||Y||Y||Y||Y|| || || || || ||
|-
|[[BHB-F]]||Stand|| || || || || ||Y||Y||Y||Y|| ||
|-
|[[BHC-F]]||Stand|| || || || || || || || || ||Y||Y
|-
|[[BH-RE]]||Nosepiece||Quintuple||Y||Y||Y||Y|| || || || || ||
|-
|[[BH-LH]]||Lamphouse|| ||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS30]]||Bulb||6V, 30W||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS15]]||Bulb||6V, 15W|| || || || || || || || ||Y||Y
|-
|[[BH-BI45]]||Observation tube||45 deg binocular|| ||Y|| ||Y|| ||Y|| ||Y|| ||Y
|-
|[[BH-TR45]]||Observation tube||45 deg trinocular||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[BH-SV]]||Stage|| ||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-CD]]||Condenser||Abbe|| || ||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-AAC]]||Condenser||Ach/Apla||Y||Y|| || || || || || || ||
|-
| ||Objective||Achromat 4x, 10x, S-40x (spring), S-100x (spring, oil) set|| || ||Y||Y|| || ||Y||Y||Y||Y
|-
| ||Objective||Plan achromat 4x, 10x, 40x (spring), 100x (spring, oil) set||Y||Y|| || ||Y||Y|| || || ||
|-
| ||Objective||Plan achromat 20x (spring)||Y||Y|| || || || || || || ||
|-
|[[BiWF10X]]||Eyepiece||HEP, paired||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[FK5X]]||Eyepiece, photo||5x||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[45C]]||Filter||for what?|| || || || || || || || || ||
|-
| ||Bulb||Spare bulb (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Fuse||Spare fuse (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Oil||Immersion oil||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Cover||Vintyl dust cover||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|}

=BHMJ configurations=

[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]]

Above: A BHMJ, probably a BHMJ-42. Source: [instruction BHMJ/-N, 3]

Source: [instruction BHMJ/-N, 2]

-N adds darkfield

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHMJ-02!!BHMJ-22!!BHMJ-42!!BHMJ-02-N!!BHMJ-22-N!!BHMJ-42-N
|-
|[[BHMJ-ST]], [[BHMJ-F]]||Body/base|| ||Y||Y||Y||Y||Y||Y
|-
|[[BH-RE]]||Nosepiece|| ||Y||Y||Y|| || ||
|-
|[[BH-NRE]]||Nosepiece|| || || || ||Y||Y||Y
|-
|[[BH-MA]]||Illuminator (vertical)||Brightfield||Y||Y||Y|| || ||
|-
|[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield|| || || ||Y||Y||Y
|-
|[[CH-M045]]||Observation tube||Monocular||Y|| || ||Y|| ||
|-
|[[BH-BI45]]||Observation tube||Monocular|| ||Y|| || ||Y||
|-
|[[BH-TR45]]||Observation tube||Binocular (w/ photo)|| || ||Y|| || ||Y
|-
|[[BH-LHM]]||Lamphouse||Tungsten||Y||Y||Y||Y||Y||Y
|-
|[[LS15]]||Bulb||15W tungsten||Y||Y||Y||Y||Y||Y
|-
|[[TF]]||Power supply||Transformer||Y||Y||Y||Y||Y||Y
|-
|[[M5X]] [[M10X]] [[M20X]] [[M40X]]||Objective||Set||Y||Y||Y|| || ||
|-
|[[Neo5X]] [[Neo10X]] [[Neo20X]] [[Neo40x]]||Objective||Set|| || || ||Y||Y||Y
|-
| ||High eyepoint BiWF10X,paired eyepiece|| ||Y||Y|| ||Y||Y
|-
| ||High eyepoint WF10X eyepiece||Y|| || ||Y|| ||
|-
|[[FK3.3X]]||Photo eyepiece|| || ||Y|| || ||Y
|-
| ||Stage plate||Y||Y||Y||Y||Y||Y
|-
| ||Stage clips||Y||Y||Y||Y||Y||Y
|-
| ||Eyepiece caps|| ||Y||Y|| ||Y||Y
|-
|[[32.5C]]||Blue filter||Y||Y||Y||Y||Y||Y
|-
| ||Vinyl dust cover||Y||Y||Y||Y||Y||Y
|-
|}

=Measurements=
Taken from Andrew Zonenberg's BHM unless otherwise stated.

===Base plate===
Attaches to microscope frame with four M6x1.0 screws, 15mm long, in a 2x2 hole pattern. Base plate has 6.7mm clearance holes, scope body is tapped.

Back row: outside to outside 42.7 mm so center to center 36 mm

Front row: outside to outside 50.5 mm so center to center 43.8 mm

Row spacing (diagonal): outside to outside 46.9 mm so center to center 40.2 mm.

Screw heads are 9.9mm OD.

Approx 135 mm front-to-back from center of microscope frame to sample

=References=

*Olympus Series BH System Microscope [BH microscope]: [http://www.alanwood.net/downloads/olympus-bh-bha-bhb-bhc-brochure.pdf]
*Olympus metallurgical microscopes instruction manual, models BHMJ & BHMJ-N [instruction BHMJ/-N]: [http://www.alanwood.net/downloads/olympus-bhmj-bhmj-n-instructions.pdf]

Olympus BH

2019-09-05T02:42:20Z

Azonenberg: Added BHM measurements, photos coming soon

[[Category:Olympus]]

=Part list=

==Model==

TODO: add standard metallurgical

{| class="wikitable sortable" border="1"
!Image!!Name!!Description!!Notes
|-
|[[File:olympus_series_bh_microscope_system1.jpg|300 px]] Source: [BH microscope, cover] [[BHA]||Bottom illumination, removable nosepiece||
|-
| ||[[BHB]]||Bottom illumination, fixed nosepiece||
|-
| ||[[BHC]]||Bottom illumination, fixed nosepiece, integrated light source||
|-
| ||[[BHMJ-02]]||Epi-illumination, sliding stanmd, BF, monocular||
|-
| ||[[BHMJ-22]]||Epi-illumination, sliding stanmd, BF, binocular||
|-
|[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]] Source: [instruction BHMJ/-N, 3] [[BHMJ-42]|| ||Epi-illumination, sliding stanmd, BF, trinocular||
|-
| ||[[BHMJ-02-N]]||Epi-illumination, sliding stanmd, BF/DF, monocular||
|-
| ||[[BHMJ-22-N]]||Epi-illumination, sliding stanmd, BF/DF, binocular||
|-
| ||[[BHMJ-42-N]]||Epi-illumination, sliding stanmd, BF/DF, trinocular||
|-
|}

==Objective==

M is BF only. Neo are BF/DF. All are M25 threaded

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[M5X]]||Objective||5x||
|-
| ||[[M10X]]||Objective||10x||
|-
| ||[[M20X]]||Objective||20x||
|-
| ||[[M40X]]||Objective||40x||
|-
| ||[[Neo5X]]||Objective||5x||
|-
| ||[[Neo10X]]||Objective||10x||
|-
| ||[[Neo20X]]||Objective||20x||
|-
| ||[[Neo40X]]||Objective||40x||
|-
| ||[[BH-RE]]||Nosepiece||Quintuple||
|-
| ||[[BH-RE]]||Nosepiece|| ||
|-
| ||[[BH-NRE]]||Nosepiece|| ||
|-
|}

==Illuminator==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[BH-MA]]||Illuminator (vertical)||Brightfield||
|-
| ||[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield||
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse||Tungsten, 30W||Pre-centered
|-
| ||[[BH-LHM]]||Lamphouse||Tungsten||
|-
|[[File:olympus_series_bh_microscope_bh-lsh.png|300 px]] Source: [BH microscope, 9] [[BH-LSH]||Lamphouse||Halogen 100W||Centerable
|-
|[[File:olympus_series_bh_microscope_bh-lh.png|300 px]] Source: [BH microscope, 9] [[BH-LH]||Lamphouse|| ||
|-
|[[File:olympus_series_bh_microscope_ls30.png|100 px]] Source: [BH microscope, 9] [[LS30]||Bulb||6V, 30W tungsten||
|-
|[[File:olympus_series_bh_microscope_ls15.png|100 px]] Source: [BH microscope, 9] [[LS15]||Bulb||6V, 15W tungsten||
|-
| ||[[FK5X]]||Eyepiece, photo||5x||
|-
| ||[[TF]]||Power supply||Transformer||voltage range?
|-
| ||[[45C]]||Filter||for what?||
|-
|[[File:olympus_series_bh_microscope_jc12v_100w.png|150 px]] Source: [BH microscope, 9] [[jc12v 100W]||Bulb||Halogen||
|-
|}

==Observation tube==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
| ||[[CH-M045]]||Observation tube||Monocular||
|-
|[[File:olympus_series_bh_microscope_bh-swtr.png|300 px]] Source: [BH microscope, 11] [[BH-SWTR]||Observation tube||Binocular w/ photo?||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI30]||Observation tube||Binocular, 30 degree||
|-
|[[File:olympus_series_bh_microscope_bh-bi30_bi45.png|300 px]] Source: [BH microscope, 11] [[BH-BI45]||Observation tube||Binocular, 45 degree||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR30]||Observation tube||Binocular, 30 degree (w/ photo)||
|-
|[[File:olympus_series_bh_microscope_bh-tr30_tr45.png|300 px]] Source: [BH microscope, 11] [[BH-TR45]||Observation tube||Binocular, 45 degree (w/ photo)||
|-
| ||[[BiWF10X]]||Eyepiece||HEP, paired||
|-
|[[File:olympus_series_bh_microscope_emm-vi.png|300 px]] Source: [BH microscope, 15] [[EMM-VI]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35l2a.png|300 px]] Source: [BH microscope, 15] [[PM-10-35L2A]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-10-35m.png|300 px]] Source: [BH microscope, 15] [[PM-10-35M]|| || ||
|-
|[[File:olympus_series_bh_microscope_pm-6.png|300 px]] Source: [BH microscope, 15] [[PM-6]|| || ||
|-
|}

==Misc==

{| class="wikitable sortable" border="1"
!Image!!Part #!!Type!!Description!!Notes
|-
|[[File:zoidberg_bh_neo_turret.jpg|200 px]] [[BH-RE]||Nosepiece||Quintuple||Neo objectives (M25)
|-
|[[File:olympus_series_bh_microscope_bha-f.png|300 px]] Source: [BH microscope, 9] [[BHA-F]||Stand||Bottom illumination, removable nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhb-f.png|300 px]] Source: [BH microscope, 9] [[BHB-F]||Stand||Bottom illumination, fixed nosepiece||
|-
|[[File:olympus_series_bh_microscope_bhc-f.png|300 px]] Source: [BH microscope, 9] [[BHC-F]||Stand||Bottom illumination, fixed nosepiece, integrated light||Lowest cost?
|-
|[[File:olympus_series_bh_microscope_bh-sv.png|300 px]] Source: [BH microscope, 13] [[BH-SV]||Stage|| ||
|-
|[[File:olympus_series_bh_microscope_bh-cd.png|300 px]] Source: [BH microscope, 13] [[BH-CD]||Condenser||Abbe||
|-
|[[File:olympus_series_bh_microscope_bh-aac.png|300 px]] Source: [BH microscope, 13] [[BH-AAC]||Condenser||Ach/Apla||
|-
| ||[[BHMJ-ST]], [[BHMJ-F]]||Body/base||
|-
| ||[[FK3.3X]]||Photo eyepiece|| ||
|-
| ||[[32.5C]]||Blue filter||
|-
|[[File:olympus_series_bh_microscope_ah-ca.png|300 px]] Source: [BH microscope, 11] [[AH-CA]|| ||
|-
|[[File:olympus_series_bh_microscope_ah-fa.png|300 px]] Source: [BH microscope, 11] [[AH-FA]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcd.png|300 px]] Source: [BH microscope, 13] [[BH-DCD]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-dcw.png|300 px]] Source: [BH microscope, 13] [[BH-DCW]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-pc.png|300 px]] Source: [BH microscope, 13] [[BH-PC]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-sh.png|300 px]] Source: [BH microscope, 13] [[BH-SH]|| ||
|-
|[[File:olympus_series_bh_microscope_bh-swc.png|300 px]] Source: [BH microscope, 13] [[BH-SWC]|| ||
|-
|}

=BHA/BHB/BHC configurations=

[[File:olympus_series_bh_microscope_system1.jpg|300 px]]

Above: probably a BHA. Source: [BH microscope, cover]

Source: [BH microscope, 18]

NOTE: -1, -2, etc are my notation for the color columns in [BH microscope, 18]

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHA-1!!BHA-2!!BHA-3!!BHA-4!!BHB-1!!BHB-2!!BHB-3!!BHB-4!!BHC-1!!BHC-2
|-
|[[BHA-F]]||Stand|| ||Y||Y||Y||Y|| || || || || ||
|-
|[[BHB-F]]||Stand|| || || || || ||Y||Y||Y||Y|| ||
|-
|[[BHC-F]]||Stand|| || || || || || || || || ||Y||Y
|-
|[[BH-RE]]||Nosepiece||Quintuple||Y||Y||Y||Y|| || || || || ||
|-
|[[BH-LH]]||Lamphouse|| ||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS30]]||Bulb||6V, 30W||Y||Y||Y||Y||Y||Y||Y||Y|| ||
|-
|[[LS15]]||Bulb||6V, 15W|| || || || || || || || ||Y||Y
|-
|[[BH-BI45]]||Observation tube||45 deg binocular|| ||Y|| ||Y|| ||Y|| ||Y|| ||Y
|-
|[[BH-TR45]]||Observation tube||45 deg trinocular||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[BH-SV]]||Stage|| ||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-CD]]||Condenser||Abbe|| || ||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[BH-AAC]]||Condenser||Ach/Apla||Y||Y|| || || || || || || ||
|-
| ||Objective||Achromat 4x, 10x, S-40x (spring), S-100x (spring, oil) set|| || ||Y||Y|| || ||Y||Y||Y||Y
|-
| ||Objective||Plan achromat 4x, 10x, 40x (spring), 100x (spring, oil) set||Y||Y|| || ||Y||Y|| || || ||
|-
| ||Objective||Plan achromat 20x (spring)||Y||Y|| || || || || || || ||
|-
|[[BiWF10X]]||Eyepiece||HEP, paired||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|[[FK5X]]||Eyepiece, photo||5x||Y|| ||Y|| ||Y|| ||Y|| ||Y||
|-
|[[45C]]||Filter||for what?|| || || || || || || || || ||
|-
| ||Bulb||Spare bulb (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Fuse||Spare fuse (2x)||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Oil||Immersion oil||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
| ||Cover||Vintyl dust cover||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y
|-
|}

=BHMJ configurations=

[[File:olympus_bhmj_and_bhmj-n_bhmj.png|300 px]]

Above: A BHMJ, probably a BHMJ-42. Source: [instruction BHMJ/-N, 3]

Source: [instruction BHMJ/-N, 2]

-N adds darkfield

{| class="wikitable sortable" border="1"
!Part #!!Type!!Description!!BHMJ-02!!BHMJ-22!!BHMJ-42!!BHMJ-02-N!!BHMJ-22-N!!BHMJ-42-N
|-
|[[BHMJ-ST]], [[BHMJ-F]]||Body/base|| ||Y||Y||Y||Y||Y||Y
|-
|[[BH-RE]]||Nosepiece|| ||Y||Y||Y|| || ||
|-
|[[BH-NRE]]||Nosepiece|| || || || ||Y||Y||Y
|-
|[[BH-MA]]||Illuminator (vertical)||Brightfield||Y||Y||Y|| || ||
|-
|[[BH-RLA]]||Illuminator (vertical)||Brightfield and darkfield|| || || ||Y||Y||Y
|-
|[[CH-M045]]||Observation tube||Monocular||Y|| || ||Y|| ||
|-
|[[BH-BI45]]||Observation tube||Monocular|| ||Y|| || ||Y||
|-
|[[BH-TR45]]||Observation tube||Binocular (w/ photo)|| || ||Y|| || ||Y
|-
|[[BH-LHM]]||Lamphouse||Tungsten||Y||Y||Y||Y||Y||Y
|-
|[[LS15]]||Bulb||15W tungsten||Y||Y||Y||Y||Y||Y
|-
|[[TF]]||Power supply||Transformer||Y||Y||Y||Y||Y||Y
|-
|[[M5X]] [[M10X]] [[M20X]] [[M40X]]||Objective||Set||Y||Y||Y|| || ||
|-
|[[Neo5X]] [[Neo10X]] [[Neo20X]] [[Neo40x]]||Objective||Set|| || || ||Y||Y||Y
|-
| ||High eyepoint BiWF10X,paired eyepiece|| ||Y||Y|| ||Y||Y
|-
| ||High eyepoint WF10X eyepiece||Y|| || ||Y|| ||
|-
|[[FK3.3X]]||Photo eyepiece|| || ||Y|| || ||Y
|-
| ||Stage plate||Y||Y||Y||Y||Y||Y
|-
| ||Stage clips||Y||Y||Y||Y||Y||Y
|-
| ||Eyepiece caps|| ||Y||Y|| ||Y||Y
|-
|[[32.5C]]||Blue filter||Y||Y||Y||Y||Y||Y
|-
| ||Vinyl dust cover||Y||Y||Y||Y||Y||Y
|-
|}

= Measurements =
Taken from Andrew Zonenberg's BHM unless otherwise stated.

=== Base plate ===
Attaches to microscope frame with four M6x1.0 screws, 15mm long, in a 2x2 hole pattern. Base plate has 6.7mm clearance holes, scope body is tapped.

Back row: outside to outside 42.7 mm so center to center 36 mm

Front row: outside to outside 50.5 mm so center to center 43.8 mm

Row spacing (diagonal): outside to outside 46.9 mm so center to center 40.2 mm.

Screw heads are 9.9mm OD.

=References=

*Olympus Series BH System Microscope [BH microscope]: [http://www.alanwood.net/downloads/olympus-bh-bha-bhb-bhc-brochure.pdf]
*Olympus metallurgical microscopes instruction manual, models BHMJ & BHMJ-N [instruction BHMJ/-N]: [http://www.alanwood.net/downloads/olympus-bhmj-bhmj-n-instructions.pdf]

DCI Drive

2019-08-10T08:08:12Z

Azonenberg: finally got the table looking right

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{| class="wikitable"
! Pin number !! Wire color !! Function
|-
| 1 || Black || Ground
|-
| 5 || Orange || +10V power to joystick
|-
| 9 || Yellow || X axis step
|-
| 10 || Green || Y axis step
|-
| 11 || Red || X axis direction
|-
| 12 || Brown || Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:07:44Z

Azonenberg: even more table tweaks

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{| class="wikitable"
! Pin number !! Wire color !! Function
|- | 1 || Black || Ground
|- | 5 || Orange || +10V power to joystick
|- | 9 || Yellow || X axis step
|- | 10 || Green || Y axis step
|- | 11 || Red || X axis direction
|- | 12 || Brown || Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:07:17Z

Azonenberg: more table edits

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{| class="wikitable"
! Pin number !! Wire color !! Function
|- 1 || Black || Ground
|- 5 || Orange || +10V power to joystick
|- 9 || Yellow || X axis step
|- 10 || Green || Y axis step
|- 11 || Red || X axis direction
|- 12 || Brown || Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:06:23Z

Azonenberg: Fixed table

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{|
! Pin number !! Wire color !! Function
| 1 || Black || Ground
| 5 || Orange || +10V power to joystick
| 9 || Yellow || X axis step
| 10 || Green || Y axis step
| 11 || Red || X axis direction
| 12 || Brown || Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:05:36Z

Azonenberg: changed image sizes

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|500px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|500px]] [[File:DCI_joystick_top.jpg|500px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{|
! Pin number ! Wire color ! Function
| 1 | Black | Ground
| 5 | Orange | +10V power to joystick
| 9 | Yellow | X axis step
| 10 | Green | Y axis step
| 11 | Red | X axis direction
| 12 | Brown | Y axis direction
|}

[[File:DCI_joystick_cable.jpg|500px]]

[[File:DCI_drive_front.jpg|500px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:05:12Z

Azonenberg: corrected image sizes

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|300px]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|300px]]

[[File:DCI_joystick_top.jpg|300px]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{|
! Pin number ! Wire color ! Function
| 1 | Black | Ground
| 5 | Orange | +10V power to joystick
| 9 | Yellow | X axis step
| 10 | Green | Y axis step
| 11 | Red | X axis direction
| 12 | Brown | Y axis direction
|}

[[File:DCI_joystick_cable.jpg|300px]]

[[File:DCI_drive_front.jpg|300px]]

TODO: internal photos of the drive unit, back panel, etc

DCI Drive

2019-08-10T08:04:19Z

Azonenberg: Created page with "DCI stepper motor driver. == Stage == The provided stage. Marked "DCI MC-001". 300 == Joystick == The stage is meant to be manually controlled via..."

DCI stepper motor driver.

== Stage ==

The provided stage. Marked "DCI MC-001".

[[File:DCI_Stage.jpg|300]]

== Joystick ==

The stage is meant to be manually controlled via a joystick.

The joystick module is a 2-layer PCB which generates step/direction pulses using one CD4046B PLL IC for each axis. This is clearly a prototype or low-volume product given that there are at least four obvious pieces of rework on the board.

[[File:DCI_joystick_bottom.jpg|300]]

[[File:DCI_joystick_top.jpg|300]]

== Drive ==

The drive unit accepts step/direction pulses on a DA-15 D-sub connector. Only six of the 15 positions are loaded, configured as follows. All signals are 5V CMOS logic levels.

{|
! Pin number ! Wire color ! Function
| 1 | Black | Ground
| 5 | Orange | +10V power to joystick
| 9 | Yellow | X axis step
| 10 | Green | Y axis step
| 11 | Red | X axis direction
| 12 | Brown | Y axis direction
|}

[[File:DCI_joystick_cable.jpg|300]]

[[File:DCI_drive_front.jpg|300]]

TODO: internal photos of the drive unit, back panel, etc

File:DCI drive front.jpg

2019-08-10T08:01:01Z

Azonenberg:

File:DCI joystick cable.jpg

2019-08-10T07:59:59Z

Azonenberg:

File:DCI joystick top.jpg

2019-08-10T07:55:30Z

Azonenberg:

File:DCI joystick bottom.jpg

2019-08-10T07:54:37Z

Azonenberg:

File:DCI Stage.jpg

2019-08-10T07:52:39Z

Azonenberg: