Difference between revisions of "Molectron"
(Tag: Visual edit) |
|||
| Line 9: | Line 9: | ||
**Interface: DB25 | **Interface: DB25 | ||
**Also known as JSA? | **Also known as JSA? | ||
| − | **3sigma, FieldMax-TOP, FieldMax-TO, FieldMate. | + | **3sigma, FieldMax-TOP, FieldMax-TO, FieldMate.s |
**Intended to be used with J25, J50 power probes | **Intended to be used with J25, J50 power probes | ||
**I also have an S10 energy probe, seems to be compatible | **I also have an S10 energy probe, seems to be compatible | ||
| Line 19: | Line 19: | ||
Other DB25 probes (none are known to be compatible): | Other DB25 probes (none are known to be compatible): | ||
| − | * Ophir | + | |
| − | * Laserpoint | + | *Ophir |
| − | * Gentec | + | *Laserpoint |
| − | * Newport | + | *Gentec |
| + | *Newport | ||
List of Molectron related power meters: | List of Molectron related power meters: | ||
| − | * 3sigma | + | |
| − | * 4omega | + | *3sigma |
| − | * FieldMate | + | *4omega |
| − | * FieldMax-TO | + | *FieldMate |
| − | * FieldMax-TOP | + | *FieldMax-TO |
| − | * Fieldmaster | + | *FieldMax-TOP |
| + | *Fieldmaster | ||
Lots of good info: | Lots of good info: | ||
| Line 106: | Line 108: | ||
Cable label: 0012-2530 | Cable label: 0012-2530 | ||
| + | |||
| + | |||
| + | {| class="wikitable" | ||
| + | |+ | ||
| + | !Pin | ||
| + | !Function | ||
| + | !Notes | ||
| + | |- | ||
| + | |1 | ||
| + | | | ||
| + | | | ||
| + | |- | ||
| + | |2 | ||
| + | | | ||
| + | | | ||
| + | |- | ||
| + | | | ||
| + | | | ||
| + | | | ||
| + | |} | ||
| + | <br /> | ||
===J-25MB-HE sensor=== | ===J-25MB-HE sensor=== | ||
Revision as of 01:07, 27 October 2021
Information on Molectron / coherent laser power meters. Ultimately for the ezlaze project. I'm mostly interested in pyroelectric heads for pulsed power.
Contents
Ecosystem
Ecosystems:
- J DB-25 smart probes
- Interface: DB25
- Also known as JSA?
- 3sigma, FieldMax-TOP, FieldMax-TO, FieldMate.s
- Intended to be used with J25, J50 power probes
- I also have an S10 energy probe, seems to be compatible
- LM DB-25 smart probes
- Interface: DB25
- Intended to be used with LM probes
Warning: J25 and LM are not compatible.
Other DB25 probes (none are known to be compatible):
- Ophir
- Laserpoint
- Gentec
- Newport
List of Molectron related power meters:
- 3sigma
- 4omega
- FieldMate
- FieldMax-TO
- FieldMax-TOP
- Fieldmaster
Lots of good info:
- Energy Sensors Coherent J25.pdf
- 2009_LMCCatalog86.pdf
There was a conversion box you could buy at one point though (thermal-smartsensor-adapter-data-sheet.pdf), so it might just be different EPROM format
- JSA-BNC Adapter
- 0012-2340: JSA-BNC Adapter for use with 3sigma, FieldMax-TOP, and FieldMax-P
- 1056827: SmartSensor Adapter for use with 3sigma, FieldMax-TOP, FieldMax-TO,and FieldMate
- Automatically configures itself to work with LM-model sensors
J25
TODO: figure out pinout, EEPROM format so I can recal and upgrade adapters
LM
3Sigma
File archive:
3sigmaAppQuickRef.pdf 3sigmaLVDriverUG.pdf 3sigma_LV_Driver.zip 3sigma Users Manual.pdf 3sigmaWinApps.zip
JD1000
Power supply: CS-1203000 (12V @ 3A, center positive)
McMaster
J25LP sensor
Came with JD1000. BNC output but no 25 pin adapter
Back:
MODEL NO: J25LP SERIAL NO: 238 RESPONSITIVITY 5.10 VOLT/JOULE 337.1 nm
S10 sensor
From 3Sigmal (eBay)
3Sigma output:
Probe Resp: 2.570E-1 A/W @ 514 nm Probe Cal Date Sep 10 2003 Wavelenth Corr 1064 nm / On Attenuation Corr: 1.00E0 / Off Area Corr 1.0000 sq cm / Off
DB25 label:
Molectron MODEL NO.: S10 SERIAL NO. 0338H03
DB25 label:
Molectron SER NO 0338H03 CAL DATE 9/18/03 CAL DUE 9/18/04 TECH B DUNLAP 0011-6322 TRACETABLE TO NIST
Cable label: 0012-2530
| Pin | Function | Notes |
|---|---|---|
| 1 | ||
| 2 | ||
J-25MB-HE sensor
3Sigma output:
FIXME
Cable label:
COHERENT Item# 1110748 Model: J-25MB-HE Serial#: 0984E07R
Responsitivity 6.694e + 0 V/J Cal 1064 nm
LM-10
LM-10 HTD 250-10600nm 10mW-10w 500mJ/cm2 10ns @ 1064n Laser
Relatively cheap impulse buy to compare EEPROM formats
3Sigma (eBay) meter
Came with CW sensor
3Sigma (dumpster dive) meter
Came w/ sensor + BNC adapter
Screen is messed up
Came with Lemo cable. Doesn't fit trigger ports or anything I can tell
JD1000 meter
Capacitor exploded when plugged in (presumably due to age). Didn't work after, although some lights turned on. Scrapped
